MS-6163 pro and new video cards

FAQ

Profile

MS-6163 pro and new video cards

Hardware Problem Solving Community! (Home) -> MSI-Microstar

Next: Dual DDR 3DMark03

Author

Message

MattK

External

Since: Jul 16, 2003
Posts: 5

(Msg. 1) Posted: Sun Jul 20, 2003 12:06 am
Post subject: MS-6163 pro and new video cards
Archived from groups: alt>comp>periphs>mainboard>msi-microstar (more info?)

Can the newer video cards, such as the Radeon 9800, work with the 6163 Pro
even though they say they require AGP 2.0 or 3.0? I've heard that they
should work fine as long as the board delivers the 3.3v directly from the
power supply. So I gues my real question is: Does the 6163 pro use a
voltage regulator to deliver the 3.3v to the agp slot or does it come
directly from the power supply?

>> Stay informed about: MS-6163 pro and new video cards

Display posts from previous:

Related Topics:

K7N2G-L Video and other problems - 3 weeks ago a bought a K7N2G-L, AMD 2500XP 333, and 512 of Corsair DDR memory and installed in my system. I also just bought an Antec True Power 480W PS. Here's my problems: Boot and POST problems, sometimes hot or cold it will not boot. The LED's..

MSI TI-4200 AGP8X Video Card. OK, where's the WINCODER?? - OK, I'll admit it, I just can't figure it out. This card came with 10 discs. One disc is a "2 in 1" with "WINPRODUCER/WINCODER". I can (and have) installed WINPRODUCER. Where is the WINCODER?? Is it part of WINPRODUCER? I underst...

Getting a half-height bracket for my video card? - Hi all- Trying to put this VGA card http://www.msicomputer.com/product/vga/vga_detail.asp?model=G4MX440-T8X into a small form factor case. Supposedly MSI makes a half-height mounting bracket for this, but damned if I can find anyplace to get one. Any....

MSI KT7 Turbo + Enermax fan monitor - MSI KT7 Turbo mainboard, new Enermax EG365P-VE FCA PSU. The Enermax has a 3-pin fan monitor connector, which the Enermax manual says connect to the "Power Fan connector" on the MB. The MSI does have the S_FAN1 "[system] Fan Power Connect...

Nvidia MCP2-T software, where can I get it? - I have the MSI K7N2 Delta L using the optional S-Bracket (has 2 x SPDIF's). I've installed the Nvidia nForce system drivers and I cannot get into the "NVidia nForce Control Panel" as shown on page A5 of the motherboard manual. I need to adjus...

	Hardware Problem Solving Community! (Home) -> MSI-Microstar	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum