 |
|
|
|
Next: MN31N installation problem
|
| Author |
Message |
External
Since: Jul 15, 2004
Posts: 4
|
(Msg. 1) Posted: Tue Aug 03, 2004 12:04 am
Post subject: Network controller on AN35N Ultra question
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)
|
|
|
|
|
| Back to top |
|
 | |
| Related Topics: | newbie question on a AN35N Ultra - I hope that this is not a really stupid question,but here it is. I currently have an AN35N Ultra motherboard with Corsair XMS 2700 memory in it. I am thinking about upgrading from my current 2500+Barton chip at 333 FSB, to a 3200+ chip running at 400...
AN35N Ultra - I recently bought 2 AN35N Ultra boards. When they post and I attempt to enter the bios setup by pressing the delete key, nothing happens for 20-30 seconds and then it enters the bios setup. Also, it has the same delay when it attempts to identify the ide...
AN35N Ultra - Hi @ all, first please excuse my bad english, i'm from Germany. ;-) I'm using a Shuttle AN35N Ultra and an Barton XP 2500+. I've tried to Overclock by setting the FSB to 200MHz and 1.750 Vcore. Runs nearly a Minute as 3200+ and then shuts down with the...
AN35N Ultra does not support DOS DMA - AN35N Ultra does not support DOS DMA, which is necessary to run Ghost or PQDI at a decent disk speed. fwiw! hth -- Kristi Shuttle AN35N Ultra, XP1700 Tbred A 168x11 1.848gHz, WinXP pro SP1(SP2), GeF3 Ti200, DX9.0b, 512mb @336
AN35N Ultra and SCSI - Any ideas why all of my drives show up as SCSI in XP pro and AN35N Ultra? I have a cd and dvd burner and a 200 GB hdd hooked up to the 2 IDE connections on my motherboard. Device manage in XP shows them as scsi and nothing under IDE ATA/ Atapi.. |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
