|
Related Topics:
| IC7-G onboard LAN? - Anyone have any how to get this working, I have loaded the latest drivers from Intel and from Abit and still can't get it to load. I get a Code 10 this device cannot start. I'm stumped, any ideas? am I missing something I'm in the..
No onboard LAN - I just XP on a newly formatted drive. Before the format the computer showed a fire-wire and an internal LAN adapter. Now I only have the fire-wire listed in Network I installed the drivers from the IC7G..
Onboard NIC Its Disapeared !!! - Hello, I have an AB9 pro board and have had a few problems getting it built. However, i thought life was dandy after some adviceon this board and I had a nice new media pc !! Now for some reason, on booting up the other day my nic was showing as netowrk.
AV8 - using both onboard RAID and a PCI RAID card - I am trying to set up my Abit AV8 with: SATA Raid 1 using onboard as boot disk for XP Pro - so that I can avoid Windows and programs if either disk fails IDE Raid 0 using Highpoint 133 PCI card - so that ..
AV8 - using both onboard RAID and a PCI RAID card - Just a note for the record - the AV8 v27 BIOS from Abit is not good at handling a PCI RAID card as well as the onboard RAID. There is a specific setting that should allow you to specify to boot from onBoard RAID instead of the PCI RAID card - but..
|
|
|
Next: ABIT: IP35 Pro experience here
|
| Author |
Message |
External
Since: Nov 09, 2007
Posts: 1
|
(Msg. 1) Posted: Fri Nov 09, 2007 6:50 pm
Post subject: Onboard Audio ChipSet, Please Help?
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)
|
|
|
Recently I installed an Audigy 2 ZS Audio Card, and now sound dosen't come
from the rear channel or the subwoofer. I've been going through the
trobleshooters documentation and it says that there may be unusual reactions
if there is more than one card installed. I've tried everything to get my
NF7 - S2 to run with out installing the driver for the chip set, but on
start up it requests the driver or even installs it its self. When I test
the spekers I get sound but when sound is played in any other method there
is no sound!
Now my question: Is there a way to turn off the onboard card? I would really
reather use the Audigy card. On Creative's site there is talk of turning it
off from the bios, but I've found nothing in the owners manual. I even
looked for a method of setting the jumpers to disarm the on board sound. The
truth,
Jim T |
|
| Back to top |
|
 | |
External
Since: Apr 07, 2004
Posts: 230
|
(Msg. 2) Posted: Fri Nov 09, 2007 6:50 pm
Post subject: Re: Onboard Audio ChipSet, Please Help? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Disable OnChip PCI Device / Audio Controller
On Fri, 9 Nov 2007 18:50:17 -0500, "James Turner"
<jturner37.DeleteThis@rochester.rr.com> wrote:
>Recently I installed an Audigy 2 ZS Audio Card, and now sound dosen't come
>from the rear channel or the subwoofer. I've been going through the
>trobleshooters documentation and it says that there may be unusual reactions
>if there is more than one card installed. I've tried everything to get my
>NF7 - S2 to run with out installing the driver for the chip set, but on
>start up it requests the driver or even installs it its self. When I test
>the spekers I get sound but when sound is played in any other method there
>is no sound!
>
>Now my question: Is there a way to turn off the onboard card? I would really
>reather use the Audigy card. On Creative's site there is talk of turning it
>off from the bios, but I've found nothing in the owners manual. I even
>looked for a method of setting the jumpers to disarm the on board sound. The
>truth,
>
>Jim T
> |
|
| Back to top |
|
| |
External
Since: Jan 21, 2007
Posts: 44
|
(Msg. 3) Posted: Fri Nov 09, 2007 6:50 pm
Post subject: Re: Onboard Audio ChipSet, Please Help? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
James Turner wrote:
> Recently I installed an Audigy 2 ZS Audio Card, and now sound dosen't come
> from the rear channel or the subwoofer. I've been going through the
> trobleshooters documentation and it says that there may be unusual reactions
> if there is more than one card installed. I've tried everything to get my
> NF7 - S2 to run with out installing the driver for the chip set, but on
> start up it requests the driver or even installs it its self. When I test
> the spekers I get sound but when sound is played in any other method there
> is no sound!
>
> Now my question: Is there a way to turn off the onboard card? I would really
> reather use the Audigy card. On Creative's site there is talk of turning it
> off from the bios, but I've found nothing in the owners manual. I even
> looked for a method of setting the jumpers to disarm the on board sound. The
> truth,
>
> Jim T
>
>
Turn it off in the BIOS-I don't know of any MB with on board audio that
you can not disable through the BIOS. >> Stay informed about: Onboard Audio ChipSet, Please Help? |
|
| Back to top |
|
| |
External
Since: Sep 26, 2007
Posts: 7
|
(Msg. 4) Posted: Fri Nov 09, 2007 9:59 pm
Post subject: Re: Onboard Audio ChipSet, Please Help? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Fri, 9 Nov 2007 18:50:17 -0500 'James Turner'
wrote this on alt.comp.periphs.mainboard.abit:
>Recently I installed an Audigy 2 ZS Audio Card, and now sound dosen't come
>from the rear channel or the subwoofer. I've been going through the
>trobleshooters documentation and it says that there may be unusual reactions
>if there is more than one card installed. I've tried everything to get my
>NF7 - S2 to run with out installing the driver for the chip set, but on
>start up it requests the driver or even installs it its self. When I test
>the spekers I get sound but when sound is played in any other method there
>is no sound!
>
>Now my question: Is there a way to turn off the onboard card? I would really
>reather use the Audigy card. On Creative's site there is talk of turning it
>off from the bios, but I've found nothing in the owners manual. I even
>looked for a method of setting the jumpers to disarm the on board sound. The
>truth,
If you can't turn it off through BIOS, you should be able to change
the jumper on the MOBO but you'll need the MOBO manual for that,
so download a copy from the ABIT site. I can switch off MOBO sound
on all ABITs I've ever used. >> Stay informed about: Onboard Audio ChipSet, Please Help? |
|
| Back to top |
|
| |
External
Since: Sep 26, 2007
Posts: 7
|
(Msg. 5) Posted: Sat Nov 10, 2007 9:59 am
Post subject: Re: Onboard Audio ChipSet, Please Help? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in/Register/Password
