|
Related Topics:
| reboots while working with windows - Hi, I installed Windows XP (linux wont install at all at the moment). I've got the Asus A8N-SLI board in my PC with a 160GB SATA HDD (and Asus 9200 GE video card). When I install programs and sometimes just when using programs the system reboots (no..
Random reboots under Windows x64, HELP. - Hi, I own an Athlon x2 processor (4400+) and I'm currently running Windows XP Pro sp1 x64. My system specs are as follows: Asus A8n32-SLI Deluxe MB Asus EN7800GTX Nvidia 256 Mb video card 4 x 512 mb PC4000 OCZ Gold Rev. 2 Ram 250Gb WD 16 Mb SATA2 HDD..
P4C800-E and Windows 98 - I'm trying to run a duel boot system with XP and 98. I didn't have any problems setting up and running 98 except that I can't get 98 to see the SoundMax drivers. I have the SoundMax drivers that Asus says will work with 98 but these zip..
Windows does not see keyboard -P4C800-E - I have a Microsoft Digital Media Pro Keyboard and a Microsoft Comfort Optical Mouse 3000. Both are wired and USB devices. However both are not during a setup or repair. I had a wireless system prior to this and thought the..
P4C800-E Deluxe -- Can't install Windows XP Pro - I am trying to Widows XP and having a problem. Every time I try, the hangs early on when XP is detecting my hardware. The floppy drive light turns on and stays on. I have tried the and..
|
|
| Author |
Message |
External
Since: Nov 16, 2007
Posts: 20
|
(Msg. 1) Posted: Mon Nov 26, 2007 8:26 pm
Post subject: P4C800-E MB reboots on Windows Power Down?
Archived from groups: alt>comp>periphs>mainboard>asus (more info?)
|
|
|
Here's a bit of a strange problem: whenever I shut down my home-built
desktop (Windows 2000, SP4)--using 'Shut Down', not 'Restart'--after
the OS closes out and the machine powers down as it should, as soon as
the fans have shut off the whole thing fires back up again: fans kick
on, the MB comes to life, BIOS boots and Windows fires up again. If I
want this machine to stay shut down, I have to flip the back power
switch off as soon as I hear the fans shutting down.
A related problem occurs using System Standby: once the standby
initiates, the monitor, fans, and HDs shut down, but then the MB, fans
[and disks?] immediately start up, the monitor remains off, and the
system can't be awakened; even the reset button doesn't work. A
physical power down and reboot is necessary. (Win2K's Power Options to
Turn off monitor and Turn off hard disks does work fine.) No screen
saver is being used.
This same machine--identical hardware, OS and software (other than
updates)--has worked fine in the past, both with Shut Down and System
Standby procedures. I did have to reset the MB bios to default values
a few times when it mistakenly thought I was overclocking when I
booted up (I've never touched those settings in BIOS or elsewhere).
I've played with the bios power management settings extensively since
this problem started occurring and haven't found the right settings to
correct the problem. All software and the BIOS are updated with the
manufacturers' latest updates. I did read on this forum of someone's
power problems with the ATI AIW Remote Control, and tried uninstalling
that, with no change in the shut down problem.
Have just done a fresh format and reinstall of the OS (to eliminate
Norton Pestworks from my system), and the problem remains, right from
the fresh Win2K + SP4 install, before installing any further updates,
drivers, or software. I'm thus pretty sure it's not the OS telling the
MB to restart, but rather something in the MB telling itself to do so.
[I did pull out and reinsert all the MB's jumpers and cable
connections once when experiencing mysterious bootup problems (which
turned out to be a bad memory card), so there's a remote but very
unlikely possibility that I replaced something incorrectly that's
causing this.]
Can any knowledgeable sorts out there advise what the BIOS Power Mgmt
settings should be to fix this? I could live with having to switch the
power button off when shutting down, but I very much like to use
System Standby as I live in a warm climate and the machine contributes
an excessive amount of room heat when not being used. Any suggestions
greatly appreciated.
Trying to keep this brief; here's some system info:
==============================
Basic systems specs:
-ASUS P4C800-E MB (AMIBIOS rev1023)
-Pentium IV 2.8MHz CPU
-ATI 9800 A-I-W Video Card
-Promise Ultra TX2-100 IDE controller card, 4 hard drives
-Antec True Blue 480W power supply
-ATI All-in-Wonder Remote Control (USB-RF)
-MS Wireless Intellimouse Explorer 2.0
-Windows 2000 SP4 OS, all Windows Updates current
-No screen saver being used
==============================
Here's the BIOS Power tab settings I'm currently using (have tried
changing various combinations of these with no luck):
Suspend Mode - Auto
Repost Video on S3 Resume - Y
ACPI 2.0 Support - Y
ACPI APIC Support - Enabled
BIOS to AML->ACPI Table - Enabled
APM Configuration:
APM Power Mgmt - Enabled
Video Power Down Mode - Suspend
Hard Disk Power Down Mode - Suspend
Suspend Time Out - Disabled
Throttle Slow Clock - 50%
System Thermal - Enabled
Power Button Mode: On/Off
Restore on AC Power Loss - Power Off
Power on by: [-All Disabled]
-RTC
-External Modems
-PCI Devices
-PS2 Keyboard
-PS2 Mouse |
|
| Back to top |
|
 | |
External
Since: Nov 16, 2007
Posts: 20
|
(Msg. 2) Posted: Wed Nov 28, 2007 1:47 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Nov 27, 7:49 pm, "Core2Duo" <Core2....DeleteThis@theinternet.com> wrote:
> A bit drastic, but have you considered re-flashing the bios?.
Core2Duo: Yes, I've just finished reflashing the BIOS, v1023 (I see a
beta 1024 out there but am not keen on BIOS betas). No change in the
problem. Had the same version installed previously, just tried
reinstalling the same in case it helped, but no go.
And have just recently tried turning off the BIOS APM, still with no
improvement. Hunting through the manual doesn't help much, it doesn't
tell you much more than the spartan help messages in the BIOS menu
itself.
I'll get down and check the jumpers soon.
Thanks for the suggestions. |
|
| Back to top |
|
| |
External
Since: Dec 30, 2006
Posts: 20
|
(Msg. 3) Posted: Wed Nov 28, 2007 2:01 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"zeke7" <zekebauer.RemoveThis@gmail.com> wrote in message
news:d59627a4-e904-45b9-ae68-326c00b900fe@s12g2000prg.googlegroups.com...
> Here's a bit of a strange problem: whenever I shut down my home-built
> desktop (Windows 2000, SP4)--using 'Shut Down', not 'Restart'--after
> the OS closes out and the machine powers down as it should, as soon as
> the fans have shut off the whole thing fires back up again: fans kick
> on, the MB comes to life, BIOS boots and Windows fires up again. If I
> want this machine to stay shut down, I have to flip the back power
> switch off as soon as I hear the fans shutting down.
>
> A related problem occurs using System Standby: once the standby
> initiates, the monitor, fans, and HDs shut down, but then the MB, fans
> [and disks?] immediately start up, the monitor remains off, and the
> system can't be awakened; even the reset button doesn't work. A
> physical power down and reboot is necessary. (Win2K's Power Options to
> Turn off monitor and Turn off hard disks does work fine.) No screen
> saver is being used.
>
> This same machine--identical hardware, OS and software (other than
> updates)--has worked fine in the past, both with Shut Down and System
> Standby procedures. I did have to reset the MB bios to default values
> a few times when it mistakenly thought I was overclocking when I
> booted up (I've never touched those settings in BIOS or elsewhere).
>
> I've played with the bios power management settings extensively since
> this problem started occurring and haven't found the right settings to
> correct the problem. All software and the BIOS are updated with the
> manufacturers' latest updates. I did read on this forum of someone's
> power problems with the ATI AIW Remote Control, and tried uninstalling
> that, with no change in the shut down problem.
>
> Have just done a fresh format and reinstall of the OS (to eliminate
> Norton Pestworks from my system), and the problem remains, right from
> the fresh Win2K + SP4 install, before installing any further updates,
> drivers, or software. I'm thus pretty sure it's not the OS telling the
> MB to restart, but rather something in the MB telling itself to do so.
>
> [I did pull out and reinsert all the MB's jumpers and cable
> connections once when experiencing mysterious bootup problems (which
> turned out to be a bad memory card), so there's a remote but very
> unlikely possibility that I replaced something incorrectly that's
> causing this.]
>
> Can any knowledgeable sorts out there advise what the BIOS Power Mgmt
> settings should be to fix this? I could live with having to switch the
> power button off when shutting down, but I very much like to use
> System Standby as I live in a warm climate and the machine contributes
> an excessive amount of room heat when not being used. Any suggestions
> greatly appreciated.
>
> Trying to keep this brief; here's some system info:
>
> ==============================
> Basic systems specs:
>
> -ASUS P4C800-E MB (AMIBIOS rev1023)
> -Pentium IV 2.8MHz CPU
> -ATI 9800 A-I-W Video Card
> -Promise Ultra TX2-100 IDE controller card, 4 hard drives
> -Antec True Blue 480W power supply
> -ATI All-in-Wonder Remote Control (USB-RF)
> -MS Wireless Intellimouse Explorer 2.0
> -Windows 2000 SP4 OS, all Windows Updates current
> -No screen saver being used
>
> ==============================
>
> Here's the BIOS Power tab settings I'm currently using (have tried
> changing various combinations of these with no luck):
>
> Suspend Mode - Auto
> Repost Video on S3 Resume - Y
> ACPI 2.0 Support - Y
> ACPI APIC Support - Enabled
> BIOS to AML->ACPI Table - Enabled
>
> APM Configuration:
>
> APM Power Mgmt - Enabled
> Video Power Down Mode - Suspend
> Hard Disk Power Down Mode - Suspend
> Suspend Time Out - Disabled
> Throttle Slow Clock - 50%
>
> System Thermal - Enabled
> Power Button Mode: On/Off
> Restore on AC Power Loss - Power Off
> Power on by: [-All Disabled]
> -RTC
> -External Modems
> -PCI Devices
> -PS2 Keyboard
> -PS2 Mouse
I'll have to restart my system to have a look, but my initial thoughts are
turn off the APM Power Mgmt, because I think this makes the OS control the
power management, not the BIOS - mind you this is only my initial thoughts.
If that's not it, I did think it could be the power switch wiring/jumper,
but then again if it was ON constantly the PS would power down after 4 secs
so I doubt this is a problem. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Dec 30, 2006
Posts: 20
|
(Msg. 4) Posted: Wed Nov 28, 2007 2:01 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
|
|
| Back to top |
|
| |
External
Since: Nov 19, 2007
Posts: 170
|
(Msg. 5) Posted: Wed Nov 28, 2007 9:02 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Somewhere on teh interweb zeke7 typed:
> On Nov 27, 7:49 pm, "Core2Duo" <Core2....TakeThisOut@theinternet.com> wrote:
>> A bit drastic, but have you considered re-flashing the bios?.
>
> Core2Duo: Yes, I've just finished reflashing the BIOS, v1023 (I see a
> beta 1024 out there but am not keen on BIOS betas). No change in the
> problem. Had the same version installed previously, just tried
> reinstalling the same in case it helped, but no go.
>
> And have just recently tried turning off the BIOS APM, still with no
> improvement. Hunting through the manual doesn't help much, it doesn't
> tell you much more than the spartan help messages in the BIOS menu
> itself.
>
> I'll get down and check the jumpers soon.
>
> Thanks for the suggestions.
Just for giggles, will you try checking the vcore is in spec please? CPU-Z
(ver 1.41) is the most reliable tool for this IMO. The CPU is under a lot of
load when it's shutting down, maybe moreso than start up. Maybe the CPU
isn't getting enough voltage?
--
TTFN,
Shaun. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 12, 2006
Posts: 60
|
(Msg. 6) Posted: Wed Nov 28, 2007 9:02 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Just a thought. Is your Windows set for automatic restart in Startup and
Recovery > System Failure. If so you may be experiencing an error on
shutdown leading to a restart.
Starting up Windows in safe mode and then seeing if the pc shuts down
correctly might help you troubleshoot this problem.
"zeke7" <zekebauer.RemoveThis@gmail.com> wrote in message
news:d59627a4-e904-45b9-ae68-326c00b900fe@s12g2000prg.googlegroups.com...
> Here's a bit of a strange problem: whenever I shut down my home-built
> desktop (Windows 2000, SP4)--using 'Shut Down', not 'Restart'--after
> the OS closes out and the machine powers down as it should, as soon as
> the fans have shut off the whole thing fires back up again: fans kick
> on, the MB comes to life, BIOS boots and Windows fires up again. If I
> want this machine to stay shut down, I have to flip the back power
> switch off as soon as I hear the fans shutting down.
>
> A related problem occurs using System Standby: once the standby
> initiates, the monitor, fans, and HDs shut down, but then the MB, fans
> [and disks?] immediately start up, the monitor remains off, and the
> system can't be awakened; even the reset button doesn't work. A
> physical power down and reboot is necessary. (Win2K's Power Options to
> Turn off monitor and Turn off hard disks does work fine.) No screen
> saver is being used.
>
> This same machine--identical hardware, OS and software (other than
> updates)--has worked fine in the past, both with Shut Down and System
> Standby procedures. I did have to reset the MB bios to default values
> a few times when it mistakenly thought I was overclocking when I
> booted up (I've never touched those settings in BIOS or elsewhere).
>
> I've played with the bios power management settings extensively since
> this problem started occurring and haven't found the right settings to
> correct the problem. All software and the BIOS are updated with the
> manufacturers' latest updates. I did read on this forum of someone's
> power problems with the ATI AIW Remote Control, and tried uninstalling
> that, with no change in the shut down problem.
>
> Have just done a fresh format and reinstall of the OS (to eliminate
> Norton Pestworks from my system), and the problem remains, right from
> the fresh Win2K + SP4 install, before installing any further updates,
> drivers, or software. I'm thus pretty sure it's not the OS telling the
> MB to restart, but rather something in the MB telling itself to do so.
>
> [I did pull out and reinsert all the MB's jumpers and cable
> connections once when experiencing mysterious bootup problems (which
> turned out to be a bad memory card), so there's a remote but very
> unlikely possibility that I replaced something incorrectly that's
> causing this.]
>
> Can any knowledgeable sorts out there advise what the BIOS Power Mgmt
> settings should be to fix this? I could live with having to switch the
> power button off when shutting down, but I very much like to use
> System Standby as I live in a warm climate and the machine contributes
> an excessive amount of room heat when not being used. Any suggestions
> greatly appreciated.
>
> Trying to keep this brief; here's some system info:
>
> ==============================
> Basic systems specs:
>
> -ASUS P4C800-E MB (AMIBIOS rev1023)
> -Pentium IV 2.8MHz CPU
> -ATI 9800 A-I-W Video Card
> -Promise Ultra TX2-100 IDE controller card, 4 hard drives
> -Antec True Blue 480W power supply
> -ATI All-in-Wonder Remote Control (USB-RF)
> -MS Wireless Intellimouse Explorer 2.0
> -Windows 2000 SP4 OS, all Windows Updates current
> -No screen saver being used
>
> ==============================
>
> Here's the BIOS Power tab settings I'm currently using (have tried
> changing various combinations of these with no luck):
>
> Suspend Mode - Auto
> Repost Video on S3 Resume - Y
> ACPI 2.0 Support - Y
> ACPI APIC Support - Enabled
> BIOS to AML->ACPI Table - Enabled
>
> APM Configuration:
>
> APM Power Mgmt - Enabled
> Video Power Down Mode - Suspend
> Hard Disk Power Down Mode - Suspend
> Suspend Time Out - Disabled
> Throttle Slow Clock - 50%
>
> System Thermal - Enabled
> Power Button Mode: On/Off
> Restore on AC Power Loss - Power Off
> Power on by: [-All Disabled]
> -RTC
> -External Modems
> -PCI Devices
> -PS2 Keyboard
> -PS2 Mouse >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Oct 09, 2004
Posts: 2479
|
(Msg. 7) Posted: Wed Nov 28, 2007 3:23 pm
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
zeke7 wrote:
> On Nov 27, 7:49 pm, "Core2Duo" <Core2....RemoveThis@theinternet.com> wrote:
>> A bit drastic, but have you considered re-flashing the bios?.
>
> Core2Duo: Yes, I've just finished reflashing the BIOS, v1023 (I see a
> beta 1024 out there but am not keen on BIOS betas). No change in the
> problem. Had the same version installed previously, just tried
> reinstalling the same in case it helped, but no go.
>
> And have just recently tried turning off the BIOS APM, still with no
> improvement. Hunting through the manual doesn't help much, it doesn't
> tell you much more than the spartan help messages in the BIOS menu
> itself.
>
> I'll get down and check the jumpers soon.
>
> Thanks for the suggestions.
Another small experiment you could try.
Disconnect Ethernet cable from the computer.
Shutdown or enter standby.
Did that change the symptoms ?
That would be assuming this is a Wake On Lan kind of problem.
Paul >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 16, 2007
Posts: 20
|
(Msg. 8) Posted: Wed Nov 28, 2007 3:44 pm
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Nov 28, 12:50 pm, Bill Anderson <billanderson....DeleteThis@yahoo.com> wrote:
> zeke7 wrote:
> > Here's a bit of a strange problem: whenever I shut down my home-built
> > desktop (Windows 2000, SP4)--using 'Shut Down', not 'Restart'--after
> > the OS closes out and the machine powers down as it should, as soon as
> > the fans have shut off the whole thing fires back up again:
>
> I have waited two days to respond to this because I had the exact same
> symptoms with one of my previous computers when I first built the
> system. The problem is that I can't remember exactly what the problem
> was or how I solved it, or even whether it was a problem with my old
> P2B-F or P4T-E rather than the P4C800-E. Gah, I'm getting old. So since
> my memory hasn't improved in the two days I've been thinking about this,
> I'll just offer the following for you to consider.
>
> I am certain that this problem cropped up with WinXP. Not sure about
> Win2K, but I was running a dual boot system with both OSs, so perhaps
> this applies to Win2K also. Or heck, it may have been Win98.
>
> When you installed the OS, did you interrupt the installation process
> right at the beginning using F5 (or maybe it's F4)? If you do, in WinXP
> anyway you'll be given a small window with three lines displayed.
> Scroll up in the window and you'll see lots more options. The third
> line from the top (in WinXP) is the ACPI option. I had to activate it
> in order to get the computer to shut down properly, and the only time
> the ACPI activation can be done (easily, anyway) is upon installation of
> the OS.
>
> And of course this may not apply to you at all. In fact, this may have
> been the solution to a different problem altogether -- like getting the
> "you may now shut down the computer" screen rather than an actual
> shutdown. I dunno. Sorry. This is just bugging me. At some time in
> the past I did have exactly the problem you've described and I solved it
> pretty quickly, as I recall. My new computer would start right up after
> shutting down. If only I could remember ....
>
> Was it simply a BIOS setting? Have you played with the power settings?
>
> --
> Bill Anderson
>
> I am the Mighty Favog
Many thanks gents for the posted suggestions, but still no go; here's
a rundown:
Core2Duo:
APM Power Mgmt in BIOS: on or off, no difference
Power switch wiring/jumper: haven't managed this yet, requires
removing my hard disks to see! Will give that a shot though.
BIOS reflashed: tried (1023), still no change
misfit:
Core voltage: CPUZ report fluctuates between 1.376-1.392v.
Looked up specs on Intel's site, quite confusing for this novice,
found these numbers, which if applicable seem to be in range:
VID = 1.475, Vmax = 1.370 V, Vmin = 1.290 V, VID = 1.500, Vmax = 1.395
V, Vmin = 1.315 V and VID = 1.525, Vmax = 1.420 V, Vmin = 1.340 V
(http://processorfinder.intel.com/details.aspx?sSpec=SL7EY#)
Fred:
Set for automatic restart in Startup and Recovery > System Failure: it
was set for restart, tried turning it off, no change
Paul:
Ethernet cable disconnect: tried many times, with BIOS wake up on LAN
setting either way, no change
Bill A.:
mine's a straightforward setup, no dual boot or multi-partitions etc.
No interruption in install process apparently available, a straight
automated install; it was similarly installed and worked fine using
same install disk and process (and hardware) in the past. AFAIR, W2K
never provides a "You may now shut down" screen; believe those are
from WinME/98 days. Yes have played w/BIOS power settings ad
infinitum, no luck. I can certainly relate to your brain's reported
'file recall' problem (-; ; keep dredging those mem-banks please!
---------------
Thanks again, this nagging problem's still here, please keep the
suggestions coming. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 18, 2004
Posts: 85
|
(Msg. 9) Posted: Wed Nov 28, 2007 5:50 pm
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
zeke7 wrote:
> Here's a bit of a strange problem: whenever I shut down my home-built
> desktop (Windows 2000, SP4)--using 'Shut Down', not 'Restart'--after
> the OS closes out and the machine powers down as it should, as soon as
> the fans have shut off the whole thing fires back up again:
I have waited two days to respond to this because I had the exact same
symptoms with one of my previous computers when I first built the
system. The problem is that I can't remember exactly what the problem
was or how I solved it, or even whether it was a problem with my old
P2B-F or P4T-E rather than the P4C800-E. Gah, I'm getting old. So since
my memory hasn't improved in the two days I've been thinking about this,
I'll just offer the following for you to consider.
I am certain that this problem cropped up with WinXP. Not sure about
Win2K, but I was running a dual boot system with both OSs, so perhaps
this applies to Win2K also. Or heck, it may have been Win98.
When you installed the OS, did you interrupt the installation process
right at the beginning using F5 (or maybe it's F4)? If you do, in WinXP
anyway you'll be given a small window with three lines displayed.
Scroll up in the window and you'll see lots more options. The third
line from the top (in WinXP) is the ACPI option. I had to activate it
in order to get the computer to shut down properly, and the only time
the ACPI activation can be done (easily, anyway) is upon installation of
the OS.
And of course this may not apply to you at all. In fact, this may have
been the solution to a different problem altogether -- like getting the
"you may now shut down the computer" screen rather than an actual
shutdown. I dunno. Sorry. This is just bugging me. At some time in
the past I did have exactly the problem you've described and I solved it
pretty quickly, as I recall. My new computer would start right up after
shutting down. If only I could remember ....
Was it simply a BIOS setting? Have you played with the power settings?
--
Bill Anderson
I am the Mighty Favog >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 19, 2007
Posts: 170
|
(Msg. 10) Posted: Wed Nov 28, 2007 9:02 pm
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Somewhere on teh interweb zeke7 typed:
<snippage>
> misfit:
> Core voltage: CPUZ report fluctuates between 1.376-1.392v.
> Looked up specs on Intel's site, quite confusing for this novice,
> found these numbers, which if applicable seem to be in range:
> VID = 1.475, Vmax = 1.370 V, Vmin = 1.290 V, VID = 1.500, Vmax = 1.395
> V, Vmin = 1.315 V and VID = 1.525, Vmax = 1.420 V, Vmin = 1.340 V
> (http://processorfinder.intel.com/details.aspx?sSpec=SL7EY#)
That voltage could be borderline. The VID (CPU-requested voltage) for your
CPU is anything from 1.475 to 1.55V. Your voltage is well below that range.
Can you please go into BIOS and change vcore. I assume you have it on
"default"? Change it to 1.50V, then boot back into Windows and re-test with
CPU-Z. If CPU-Z doesn't say 1.50V then take into account the difference and
go back into BIOS and adjust accordingly until you get 1.50V showing on
CPU-Z.
Fingers crossed, it just might fix the problem. Can't do any harm anyway,
you can always put it back.
--
TTFN,
Shaun. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 16, 2007
Posts: 20
|
(Msg. 11) Posted: Wed Nov 28, 2007 10:48 pm
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Nov 28, 5:51 pm, Bill Anderson <billanderson... RemoveThis @yahoo.com> wrote:
> zeke7 wrote:
>
> > Bill A.:
> > mine's a straightforward setup, no dual boot or multi-partitions etc.
> > No interruption in install process apparently available, a straight
> > automated install; it was similarly installed and worked fine using
> > same install disk and process (and hardware) in the past. AFAIR, W2K
> > never provides a "You may now shut down" screen; believe those are
> > from WinME/98 days. Yes have played w/BIOS power settings ad
> > infinitum, no luck. I can certainly relate to your brain's reported
> > 'file recall' problem (-; ; keep dredging those mem-banks please!
>
> Have you looked at this page?
>
> http://www.annoyances.org/exec/show/article07-016
>
> --
> Bill Anderson
>
> I am the Mighty Favog
Shaun--I'm keen to try changing the voltage, but just did a thorough
hunt through my BIOS menu, couldn't find any voltage setting, only fan
speeds, temperatures & the like. Can you give me a clue what menu it
might be buried in? All I can figure is maybe it's a popup menu that
only appears when I enable a currently disabled feature (like the APM
menu), but tried several of those and nothing showed up. We are
talking about the AMIBIOS menu accessed by hitting Del on bootup,
right, or is there another bios menu I can access?
Bill: Had a look at the Annoyances page you gave; one link on it was
outdated and in spite of the very encouraging header, the two options
they talk don't sound sound likely: there is basically no shutdown
screen to tweak with in Win2K (other than a small box saying Windows
is Now Shutting Down), and I've certainly never tweaked anything
there. And as best as I can keep track I'm up to date on drivers--
video, LAN, BIOS, sound, mouse, Windows updates, IDE card, etc.
For all, a new occurrence is happening that may point things to my
Antec True480 power supply. As noted, to keep the system from
rebooting when I want to power down, I have to flip off the power
supply switch in back. Now, whenever I do want to restart, as soon as
I hit the back power switch, things start to fire up for about 3
seconds before petering out; if I then hit the front-panel reset, it
will restart and boot fine. But previously, under normal operating
conditions, when I flipped on the back switch, nothing happened except
to light up the MB's internal indicator light: I would have to press
the front-panel power button to actually get the power rolling. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 18, 2004
Posts: 85
|
(Msg. 12) Posted: Wed Nov 28, 2007 10:51 pm
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
zeke7 wrote:
>
> Bill A.:
> mine's a straightforward setup, no dual boot or multi-partitions etc.
> No interruption in install process apparently available, a straight
> automated install; it was similarly installed and worked fine using
> same install disk and process (and hardware) in the past. AFAIR, W2K
> never provides a "You may now shut down" screen; believe those are
> from WinME/98 days. Yes have played w/BIOS power settings ad
> infinitum, no luck. I can certainly relate to your brain's reported
> 'file recall' problem (-; ; keep dredging those mem-banks please!
>
Have you looked at this page?
http://www.annoyances.org/exec/show/article07-016
--
Bill Anderson
I am the Mighty Favog >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Dec 30, 2006
Posts: 20
|
(Msg. 13) Posted: Thu Nov 29, 2007 7:02 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"zeke7" <zekebauer DeleteThis @gmail.com> wrote in message
news:347d9832-d316-49cd-a922-055074b100ab@e1g2000hsh.googlegroups.com...
> On Nov 28, 5:51 pm, Bill Anderson <billanderson... DeleteThis @yahoo.com> wrote:
>> zeke7 wrote:
>>
>> > Bill A.:
>> > mine's a straightforward setup, no dual boot or multi-partitions etc.
>> > No interruption in install process apparently available, a straight
>> > automated install; it was similarly installed and worked fine using
>> > same install disk and process (and hardware) in the past. AFAIR, W2K
>> > never provides a "You may now shut down" screen; believe those are
>> > from WinME/98 days. Yes have played w/BIOS power settings ad
>> > infinitum, no luck. I can certainly relate to your brain's reported
>> > 'file recall' problem (-; ; keep dredging those mem-banks please!
>>
>> Have you looked at this page?
>>
>> http://www.annoyances.org/exec/show/article07-016
>>
>> --
>> Bill Anderson
>>
>> I am the Mighty Favog
>
>
> Shaun--I'm keen to try changing the voltage, but just did a thorough
> hunt through my BIOS menu, couldn't find any voltage setting, only fan
> speeds, temperatures & the like. Can you give me a clue what menu it
> might be buried in? All I can figure is maybe it's a popup menu that
> only appears when I enable a currently disabled feature (like the APM
> menu), but tried several of those and nothing showed up. We are
> talking about the AMIBIOS menu accessed by hitting Del on bootup,
> right, or is there another bios menu I can access?
>
> Bill: Had a look at the Annoyances page you gave; one link on it was
> outdated and in spite of the very encouraging header, the two options
> they talk don't sound sound likely: there is basically no shutdown
> screen to tweak with in Win2K (other than a small box saying Windows
> is Now Shutting Down), and I've certainly never tweaked anything
> there. And as best as I can keep track I'm up to date on drivers--
> video, LAN, BIOS, sound, mouse, Windows updates, IDE card, etc.
>
> For all, a new occurrence is happening that may point things to my
> Antec True480 power supply. As noted, to keep the system from
> rebooting when I want to power down, I have to flip off the power
> supply switch in back. Now, whenever I do want to restart, as soon as
> I hit the back power switch, things start to fire up for about 3
> seconds before petering out; if I then hit the front-panel reset, it
> will restart and boot fine. But previously, under normal operating
> conditions, when I flipped on the back switch, nothing happened except
> to light up the MB's internal indicator light: I would have to press
> the front-panel power button to actually get the power rolling.
You must check the connection of the power switch to the MB. It sounds like
it could have the wrong orientation.
Also check the Reset switch.
Your comment "things start to fire up for about 3 seconds before petering
out" implies the power button is 'activated' as far as the MB is ocncerned,
& thus causing the actual PS to power down, just as it should under normal
circumstances ie. a forced Power Down. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 19, 2007
Posts: 170
|
(Msg. 14) Posted: Thu Nov 29, 2007 8:02 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Somewhere on teh interweb Core2Duo typed:
<snip>
> You must check the connection of the power switch to the MB. It
> sounds like it could have the wrong orientation.
LOL. No offence man but it doesn't matter what "orientation" it's at.
> Also check the Reset switch.
Same with the reset switch.
--
TTFN,
Shaun. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
External
Since: Nov 19, 2007
Posts: 170
|
(Msg. 15) Posted: Thu Nov 29, 2007 9:02 am
Post subject: Re: P4C800-E MB reboots on Windows Power Down? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Somewhere on teh interweb zeke7 typed:
> Shaun--I'm keen to try changing the voltage, but just did a thorough
> hunt through my BIOS menu, couldn't find any voltage setting, only fan
> speeds, temperatures & the like. Can you give me a clue what menu it
> might be buried in? All I can figure is maybe it's a popup menu that
> only appears when I enable a currently disabled feature (like the APM
> menu), but tried several of those and nothing showed up. We are
> talking about the AMIBIOS menu accessed by hitting Del on bootup,
> right, or is there another bios menu I can access?
No, you're in the right place.
Try "Advanced" "Jumperfree Configuration" "AI Overclock Tuner". Set to
manual. That should (hopefully) give you access to the "CPU Vcore Voltage"
option. Change it from "Auto" to, say 1.50V. (leave everything else as-is
for now). Then boot into Windows and check what CPU-Z is telling you.
> For all, a new occurrence is happening that may point things to my
> Antec True480 power supply. As noted, to keep the system from
> rebooting when I want to power down, I have to flip off the power
> supply switch in back. Now, whenever I do want to restart, as soon as
> I hit the back power switch, things start to fire up for about 3
> seconds before petering out; if I then hit the front-panel reset, it
> will restart and boot fine. But previously, under normal operating
> conditions, when I flipped on the back switch, nothing happened except
> to light up the MB's internal indicator light: I would have to press
> the front-panel power button to actually get the power rolling.
Ok, you possibly changed a setting in the BIOS. On the "Power" tab, under
"APM Configuration" there is a "Restore on AC power loss" that you can set
to 'Power on", Power off" or "last state". Perhaps you changed that from off
to on?
Either that and/or your PSU could be playing up. That could explain
everything. Let's hope not.
Cheers,
--
Shaun. >> Stay informed about: P4C800-E MB reboots on Windows Power Down? |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in/Register/Password
