Welcome to HardwareForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

P4DC6 heatsink suggestion

 
   Hardware Problem Solving Community! (Home) -> Supermicro RSS
Next:  What is a WHQL driver?  
Author Message
balzano_1

External


Since: May 13, 2007
Posts: 1



(Msg. 1) Posted: Sun May 13, 2007 8:57 am
Post subject: P4DC6 heatsink suggestion
Archived from groups: alt>comp>periphs>mainboard>supermicro (more info?)

Hi, Recently i managed to get my hands on a 2.4Ghz xeon processor to
fill my second cpu slot on my P4DC6 mb.

Only; I seem to have misplaced my second heatsink and cannot use the
processor until i find a new heatsink. So before i go shop for a new
heatsink i thought i'd ask for advice on which one i should choose. A
low noise modest one is on the top of my list Smile

Thanks.

 >> Stay informed about: P4DC6 heatsink suggestion 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
P4DC6 - Group, I have a P4DC6 MB that has some problems.It has 2 1.7ghz Xeons,2gigs ram.This unit would freeze up everyday.I removed 1.gig of ram from socket 0.Freezing went away.Bingo bad ram.Nope.Ordered new ram.Now it will not even boot with ANY ram..

P4DC6+ and Hyperthreading - I've got hyperthreading enabled in the BIOS on my P4DC6+ (dual Xeon 2.4's) and XP Professional shows 4 processors OK, but I'm not sure things are working correctly. When I start a CPU-intensive process like WinRAR, the first CPU in Task Manager pegs....

P4DC6+ Max CPU Speed - Has anyone tried a 603pin XEON greater than 2.4GHz on this motherboard? I'm looking at upgrading my processors and all I can find is that Supermicro says 2.4 is all they have tested to therefore can't give a reliable answer as to whether the newer 2.6..

P4DC6+: which temperatures on which sensors? - My P4DC6+ m/b has w83627hf health chip the supports 3 temperature sensors, one for the motherboard and one for each CPU. The output from lm_sensors (in Linux) is shown below. The m/b sensor is apparently temp1. How can determine which CPU temperature....

Linux + P4DC6+ , Sound problems . - Hi, i Have a p4dc6+ with linux on it, its running vary well, but i cant seem to get the onboard sound adapter to work, im using SuSe8.2. The recommended driver for this adapter is snd-intel8x0.o, but when i modprobe it it gives me errors, and...
   Hardware Problem Solving Community! (Home) -> Supermicro All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]