Welcome to HardwareForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

P4X400 Issues w/ XP Pro Lockup/Freeze

 
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Next:  Starting Problem, even fans do not spin etc.  
Author Message
ChrisB

External


Since: Nov 30, 2006
Posts: 1



(Msg. 1) Posted: Thu Nov 30, 2006 8:02 am
Post subject: P4X400 Issues w/ XP Pro Lockup/Freeze
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)

Well well well....

Im not sure if I could tweak the settings in the mobo to make this run
smoother, or is the mobo junk?? I have Swapped out Power Supply, CPU,
Fan/Heatsink, Audio Card, and even tried running a new windows install
on a different hard drive. The windows setup will just freeze about 1/4
of the way through. I have the On board Audio disabled, along with IRQ
for AGP and IRQ for USB disabled. I have tuned down the GFX card
(nVidia GeForce4 440MX) settings in BIOS as well, disabled flash write,
and the Master 1 Write/Read disabled. I also have AGP Shadow BIOS
disabled as well. Ive moved ram into all 3 of the slots, and Ive tried
my single PnP item on slot 2 and 5 which have IRQ Mapping. I am at a
loss where to go from here!!

 >> Stay informed about: P4X400 Issues w/ XP Pro Lockup/Freeze 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Boot-up Issues P4X400 Lite - Any suggestions? Sys powers up, no video, no beebing sounds, cpu fan turns. I cleared CMOS; Not sure about any other jumpers; Using a Celeron 2.6 478 128KB L2 400 FSB, power is 475 watts, CPU is connected to CPUFAN1, I removed the board from the case and...

Usb 2.0 on p4x400 - I have p4x400 with XP Pro, celeron 2.2G, 1GB mem, NV fx5200, SBLive, 40G WD HD, recently purchased Bytecc USB 2.0 external drive enclosure and WD 160GB drive. USB worked with dazzle 6in1 reader and other USB devices. When I plugged in external drive..

P4X400 and 9800 pro - before i install the 9800 pro on my SY-P4X400 i figured i would ask for help. there is a power connector at the agp slot on this mobo. there is also a power connector on the 9800 pro. will it hurt if i hook them both up? any comments will be greatly..

Sound problems (mostly DOS) on P4X400 - Mobo: P4X400 Dragon Lite Sound card: SB Live! 5.1 Gamer Having trouble getting these two buggers to work together nicely. Sound in Linux and Windows is just fine, but when it comes to SB16 emulation in DOS, nothing works. I've followed the directions....

Realtek NIC on P4X400 Ultra - The Realtek LAN chip on this board places a fixed IP in my TCP/IP when used with a cable modem. Is there a way around this and is it a common problem or defective 8100b chip? When I put in a NIC card in a PCI slot, the card works fine, but I need the..
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]