Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

PDSGE and 3rd party SCSI controllers

  
   Hardware Problem Solving Community! (Home) -> Supermicro RSS
Next:  Delay in Start when Pushing Power Button  
Author Message
mvandusen

External


Since: Dec 16, 2004
Posts: 3



(Msg. 1) Posted: Mon Mar 27, 2006 12:55 am
Post subject: PDSGE and 3rd party SCSI controllers
Archived from groups: alt>comp>periphs>mainboard>supermicro (more info?)
Has anyone gotten the mentioned motherboard to boot an add-in SCSI
controller? The MB BIOS seems to be clueless!

Regards,
Mike

 >> Stay informed about: PDSGE and 3rd party SCSI controllers 
Back to top
Login to vote
DER1

External


Since: Oct 20, 2004
Posts: 8



(Msg. 2) Posted: Tue Jun 13, 2006 11:59 am
Post subject: Re: PDSGE and 3rd party SCSI controllers [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I don't use SCSI drives, but I just built a workstation around the PDSGE
Mobo and their SC743T-650 chassis. I used an Adaptec 2410SA RAID 5
controller card with four WD 320GB HDD's. Everything has been perfect from
the get-go. Fast as lighting!

DER

 >> Stay informed about: PDSGE and 3rd party SCSI controllers 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
X5DA8 + 2010S = slow SCSI performance - I am trying to debug and setup an X5DA8 board and have been extremely disappointed in the slow SCSI drive speeds when using an Adaptec 2010S in the green PCI-X slot. 4 Seagate ST336607LW drives only give 72.2 MB/s (across the whole 140GB) through put in...

P3TDE6, hangs on boot from SCSI CDROM - This system has a SCSI CDROM and two IDE drives on a Promise RAID controller. At boot time it recognizes a Windows 2000 server CDROM, and begins to run it. Then it comes up with "Couldn't open the boot partition to check for a signature", fo...

Supermicro Boards vs. Adaptec SCSI RAID - Hi! We have several Supermicro Server Barebones (PIV, XEON) and we are wondering about the poor SCSI performance of the RAID-Arrays controlles by the Adaptec zero channel RAID cards. Some servers use the 2010S, some the 2015S, some RAID1, some RAID5..

Supermicro P6DGU, flaky scsi disk IO - how to diagnose? - About 6 months ago I started having SCSI disk problems on my Supermicro P6DGU. It would take the machine 2-3 minutes to recognize the disk at all on cold startup, then it would run fine. Then it took longer and longer, then I started getting disk errors....

370DLI - Hi there I am having a supermicro 370DLI and I unknowing of the 100MHz limitation I bought 2 1Ghz processors and because of the 100MHz bus speed problem I am only able to run them at 750MHz each. Has anybody managed to modify the board to be able to ru...
   Hardware Problem Solving Community! (Home) -> Supermicro All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]