Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

PDSMi RAID - Intel or Adaptec?

  
   Hardware Problem Solving Community! (Home) -> Supermicro RSS
Related Topics:
Supermicro Boards vs. Adaptec SCSI RAID - Hi! We have several Server Barebones (PIV, XEON) and we are wondering about the poor SCSI of the by the Adaptec zero channel RAID cards. Some servers use the 2010S, some the 2015S, some RAID1, some RAID5..

SATA Raid (intel ich5r) and win 2003? - Hi, I have a problem with a brand new 5013C-T with a P4 2.60GHz HT, 2x512MB kingston RAM, 2 x WD 120GB sata disks and windows 2003 (SBS). The system creates the raid volume without problem. However, the for windows refuse to..

Intel® 82801ER (ICH5R) Serial ATA RAID & Windows 2003 SBS .. - I have been unable to install Windows 2003 Small Business Server (Final Release) on my My server has 2x512GB RAM and a single 2.4 GHz Proc. I have narrowed the problem down to the Intel® 82801ER (ICH5R) Serial ATA RAID, which I..

P4DCE+ and Adaptec Storage Manager Pro problems - Has anyone any ideas why some programs will just not run on the P4DCE+ and give exception errors? An example of this is the Adaptec Storage Manager Pro which will fail on the of the or on the if

P4SCT+II, using Marvell RAID - I noticed that the Marvell supports tagged command queuing on this board. I need to build a small file server for a database (not an server , just a database on the clients that opens a lot of files). RAID 1 is
Next:  Supermicro: ALL Supermicro's Power Supplies - A question - See message..  
Author Message
Someone

External


Since: Nov 28, 2005
Posts: 4



(Msg. 1) Posted: Fri Feb 03, 2006 3:33 pm
Post subject: PDSMi RAID - Intel or Adaptec?
Archived from groups: alt>comp>periphs>mainboard>supermicro (more info?)
So what's the deal here? This new PDSMi motherboard comes
with a manual that says it has the Intel ICH7R RAID controller,
and that you use <Ctrl><I> to enter the RAID setup.

The bootup screen says it is an Adaptec RAID controller and
that you use <Ctrl><A> to enter the RAID setup.

Furthermore, when you load the Intel driver during Windows
installation (F6), Windows sees two separate drives to choose
from to install Windows instead of one logical drive.

Can someone suggest what to do? Is the manual wrong
and we should install the Adaptec RAID driver for F6?

 >> Stay informed about: PDSMi RAID - Intel or Adaptec? 
Back to top
Login to vote
Someone

External


Since: Nov 28, 2005
Posts: 4



(Msg. 2) Posted: Fri Feb 03, 2006 3:46 pm
Post subject: Re: PDSMi RAID - Intel or Adaptec? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Disregard. It works fine if you use the
"Intel SATA Drivers by 3rd Party (Adaptec)"
drivers.

"Someone" <someone.DeleteThis@somewhere.net> wrote in message
news:11u7pvnfc905v5b@news.supernews.com...
> So what's the deal here? This new PDSMi motherboard comes
> with a manual that says it has the Intel ICH7R RAID controller,
> and that you use <Ctrl><I> to enter the RAID setup.

 >> Stay informed about: PDSMi RAID - Intel or Adaptec? 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Supermicro All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]