Problem with monitor output Tyan trinity 400 S1854

External Since: Aug 13, 2003 Posts: 1

Hi All,

My board seems to loose control of the video periodically. I have tried
different AGP cards and different monitors so I think its the AGP slot
or the board. Basically, the video looks like a TV with the vertical
control gone wild. Has this happened before? Any suggestions for a cure?

Thanks,
Jim

External Since: Jul 03, 2003 Posts: 82

try setting in bios to disable ago using an irq (or something along those
lines). Might be Vga Uses IrQ = disabled or such. Also see if anything else
is sharing irq's with your agp card. If so, try moving stuff around so its
not shared. Good luck.

"JD" <mill.tek RemoveThis @verizon.net> wrote in message
news:ish_a.6161$wg6.1247@nwrddc02.gnilink.net...
> Hi All,
>
> My board seems to loose control of the video periodically. I have tried
> different AGP cards and different monitors so I think its the AGP slot
> or the board. Basically, the video looks like a TV with the vertical
> control gone wild. Has this happened before? Any suggestions for a cure?
>
>
> Thanks,
> Jim
>