Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

RAID problems on DG965OT mainboard

  
   Hardware Problem Solving Community! (Home) -> General Discussion RSS
Related Topics:
What mainboard do i have? - Can someone please let me know if given the stats below what my mainboard is called: Compaq SLot 1 Pentium II Board 1998 Slot 1 cpu port Onboard: 2x monitor port 1x mouse port 1x keyboard port 1x Ethernet port 1x..

mainboard or what - We, my grandson, and myself are trying to build a gaming = machine. So far we have assembled the CPU is intel Pentium 4 3.0G (800Mhz) Mobo is Aopen AX4C Max, Intel 875P Chipset Ultra ATA133 ATX Form = FActor

Best SLI MAINBOARD? - Who makes the best 939 with SLI support in terms of and had reports on MSI,some rate them according to good customer there really such a thing with any..

Mainboard for Duron 1300 - I have a Duron 1300 model which I need a board. Can any one suggest a good board which is still thanks, Rich remove the obvious

Athlon Mainboard - Hello Here's the machine info and following the stated problems. Albatron ATX - VIA L7VTA I work for a non profit and this machine was donated for office use. When I got it it needed to be fine tuned. However, there..
Next:  General Discussion: Socket 775 Motherboard with 4 x SATA II (300) and RAID 0+1  
Author Message
Per R.

External


Since: May 05, 2007
Posts: 3



(Msg. 1) Posted: Sat May 05, 2007 8:55 am
Post subject: RAID problems on DG965OT mainboard
Archived from groups: alt>comp>periphs>mainboard (more info?)
I can't get Windows Vista to start on RAID on my DG965OT mainboard. I have
cloned my SATA drive to two drives running as RAID-0.

When I "Configure SATA as: RAID" in the BIOS it starts up as normal, until
the first Vista screen comes up. Then it freezes for a second and the system
just restarts. This problem occurs when I try to boot up from the SATA
drive, and when I remove the old drive and try to startup from the RAID
drives. In both cases its the same problem. When I set the bios to
"Configure SATA as: IDE" and connect the SATA a drive again the system
starts up as normal, with the two RAID drives shown as separate drives.

Why can't my system start when I set the BIOS to use RAID???

PS: Shouldn't it be possible to startup with RAID and non-RAID disks at the
same time?

 >> Stay informed about: RAID problems on DG965OT mainboard 
Back to top
Login to vote
Per R.

External


Since: May 05, 2007
Posts: 3



(Msg. 2) Posted: Sat May 05, 2007 10:56 am
Post subject: Re: RAID problems on DG965OT mainboard [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Hmm... It seem that the system stops on a file called crcdisk.sys according
to the bootlog???



"Per R." <no DeleteThis @way.com> skrev i meddelelsen
news:h5idnTnCUsa46aHbnZ2dnUVZ8qminZ2d@giganews.com...
>I can't get Windows Vista to start on RAID on my DG965OT mainboard. I have
> cloned my SATA drive to two drives running as RAID-0.
>
> When I "Configure SATA as: RAID" in the BIOS it starts up as normal, until
> the first Vista screen comes up. Then it freezes for a second and the
> system
> just restarts. This problem occurs when I try to boot up from the SATA
> drive, and when I remove the old drive and try to startup from the RAID
> drives. In both cases its the same problem. When I set the bios to
> "Configure SATA as: IDE" and connect the SATA a drive again the system
> starts up as normal, with the two RAID drives shown as separate drives.
>
> Why can't my system start when I set the BIOS to use RAID???
>
> PS: Shouldn't it be possible to startup with RAID and non-RAID disks at
> the
> same time?

 >> Stay informed about: RAID problems on DG965OT mainboard 
Back to top
Login to vote
Per R.

External


Since: May 05, 2007
Posts: 3



(Msg. 3) Posted: Sun May 06, 2007 9:56 am
Post subject: Re: RAID problems on DG965OT mainboard [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Problem solved.

I opened regedit. Went to
"HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV" and changed
the value of "Start" to 0 and that did the trick. Now I just have to
reactivate???
 >> Stay informed about: RAID problems on DG965OT mainboard 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> General Discussion All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]