Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

REQ: Advice: Disks

  
   Hardware Problem Solving Community! (Home) -> Shuttle RSS
Next:  moving sata RAID 0 drives to a new computer-and s..  
Author Message
Donald Bock

External


Since: Mar 31, 2005
Posts: 5



(Msg. 1) Posted: Tue Mar 14, 2006 4:55 pm
Post subject: REQ: Advice: Disks
Archived from groups: alt>comp>periphs>mainboard>shuttle (more info?)
I have a Shuttle AK35GT2R Motherboard with HighPoint RAID v3.72 and two WD
80GB IDE drives.

I don't feel too comfortable having the two drives striped as they are now
since I have had them that way for about two years, without loading the
drives past the 80GB boundary.

Hence, if I wanted can I REDO the RAID setup from Striped to non-striped
without data loss?

Thanks, Donald Bock

 >> Stay informed about: REQ: Advice: Disks 
Back to top
Login to vote
NewMan

External


Since: Oct 15, 2005
Posts: 19



(Msg. 2) Posted: Tue Mar 14, 2006 5:43 pm
Post subject: Re: REQ: Advice: Disks [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
That may be a question better asked in the following newsgroup:

comp.sys.ibm.pc.hardware.storage



On Tue, 14 Mar 2006 20:45:33 GMT, Donald Bock <bock.don.RemoveThis@gmail.net>
wrote:

>I have a Shuttle AK35GT2R Motherboard with HighPoint RAID v3.72 and two WD
>80GB IDE drives.
>
>I don't feel too comfortable having the two drives striped as they are now
>since I have had them that way for about two years, without loading the
>drives past the 80GB boundary.
>
>Hence, if I wanted can I REDO the RAID setup from Striped to non-striped
>without data loss?
>
>Thanks, Donald Bock

 >> Stay informed about: REQ: Advice: Disks 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
AN50R SATA disks don't work - Shuttle An50R mainboard; Samsung S1614C (160Gb) SATA disks. Attaching the disks, is fine. the RAID controller sees them fine. I can raid or mirror or use separately. However, when attempting to format (either from fresh Windows XP instlal or from..

AV49P/N support for large disks??? - I am looking to install a 320GB Seagate disk into my system. The motherboard is the Shuttle AV49P/N. From what I can tell, WinXP will not be a problem. However, I have a multi-boot configuration with the option to boot to Win98se or WinXP. I was reading...

Advice: Best -2D- board for SB51? - Hello. I was planning on putting a Matrox card into an SB51 to improve the graphics, but I've read a few posts now detailing trouble with a Shuttle/Matrox combination. Question is then, what are people using as an alternative? The rules are - it must..

SN41G2 - advice would be helpful - I've got the SN41G2 running 2 - 512MB DDR2700 RAM modules, XP2500+(Barton). The BIOS is the last rev (required for the XP2500+). Once the BIOS was updated, the unit has been very solid and reasonably fast. I'm using the motherboard video. I do have some....

advice on purchase needed please - Hi folks, I'm just about to go ahead and upgrade my ageing XP1600 system with a nice shiny new shuttle....but...really don't know what to go for. I've been looking at the SN41G2, SN45G (or SN45GV2) or the SN85G4 (all AMD as I've been using AMD for th...
   Hardware Problem Solving Community! (Home) -> Shuttle All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]