Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Recover the BIOS => Safe Mode Jumper ?

 
   Hardware Problem Solving Community! (Home) -> MSI-Microstar RSS
Next:  MB - System Panel Connector  
Author Message
ftzpr-google

External


Since: Aug 15, 2007
Posts: 1



(Msg. 1) Posted: Wed Aug 15, 2007 11:50 am
Post subject: Recover the BIOS => Safe Mode Jumper ?
Archived from groups: alt>comp>periphs>mainboard>msi-microstar (more info?)

Hello,

I have msi motherboard card MSI (MS-7301).
Recently, i have upgrade the firmware but i use a bad bios...
So now, the computer doesn't want to start and stay locked on a black
screen with a twinkling cursor...

So i see on the motherboard manual that it should be possible to
recover the bios using the safe mode Jumper...
I have to remove the jumper in order to recover the bios...

So does someone has tryed it yet ?

Else is there an other solution to recover the original bios ?

Thanks.

 >> Stay informed about: Recover the BIOS => Safe Mode Jumper ? 
Back to top
Login to vote
Paul57

External


Since: Oct 09, 2004
Posts: 2479



(Msg. 2) Posted: Thu Aug 16, 2007 5:28 am
Post subject: Re: Recover the BIOS => Safe Mode Jumper ? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

ftzpr-google.TakeThisOut@yahoo.fr wrote:
> Hello,
>
> I have msi motherboard card MSI (MS-7301).
> Recently, i have upgrade the firmware but i use a bad bios...
> So now, the computer doesn't want to start and stay locked on a black
> screen with a twinkling cursor...
>
> So i see on the motherboard manual that it should be possible to
> recover the bios using the safe mode Jumper...
> I have to remove the jumper in order to recover the bios...
>
> So does someone has tryed it yet ?
>
> Else is there an other solution to recover the original bios ?
>
> Thanks.
>

http://support.packardbell.com/uk/item/index.php?i=ml065a&ppn=PB35305101

"Recovery
The BIOS attempts to recover the BIOS Configuration.
A recovery diskette is required."

"BIOS recovery jumper (JREC1)

If your BIOS was corrupted in any way, you can reload its values using
a BIOS recovery diskette. This diskette is not delivered with your
computer but may be supplied in certain cases by a support technician.
In this event the support technician will also provide instructions on
how to carry out the procedure."

Hmmm. Looks like you need to get the BIOS file onto a floppy first.
Maybe tech support can help out. The thing is, the BIOS file may
need to be renamed with a particular name. Or be put on the
floppy, along with MSDOS boot files. With the lack of info on the
above pages, it is hard to guess what is the next step.

Paul

 >> Stay informed about: Recover the BIOS => Safe Mode Jumper ? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
K8N Neo 4 - BIOS Message - Started in Safe Mode? - I just got a surprise BIOS level message when starting my system up - from memory it was something like "Started in Safe Mode- check your over-clocking settings". I pressed F1 and the machine booted up normally. I then did a cold restart and...

Safe to assume my mobo is dead? - Hello all. I have the MSI K7N2-L Delta (MSI 6570 Version 1) for a couple of weeks and I've now run out of ideas. I installed the board with 1Gb of matched Geil ram (Golden dragon) and a Barton XP 3000+. The memory was underclocked and so was the chip.....

Liner mode - Yep, What means "Liner mode"? I have Dual Channel GEIL PC 3200 Memory -- Thnx, Frank

MS-6315 and Linux console mode incompatible? - Hi all, I have tried installing Ubuntu 7.04 on an MS-6315 many times. The screen goes "crazy" when it is sent into 80x25 character mode. If I wait long enough for it to kick into graphics mode, everything runs fine. Does anyone know of a fi...

2600+ on KT4 BIOS says CPU is an XP 2000+ ???? - Hi I'm just putting together a KT4VL with a 2600+ and a single stick (double sided) of 512Mb PC2700. The BIOS bootup screen says XP 2000+ and Processor clock is 1667Mhz. Any idea why it cant tell its a 2600?? The only thing Ive set is FSB to 133. I....
   Hardware Problem Solving Community! (Home) -> MSI-Microstar All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]