Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

S2668: IRQ question

  
   Hardware Problem Solving Community! (Home) -> Tyan RSS
Next:  Tyan 1854--Powerleap upgrade to Celeron-1.4 but o..  
Author Message
Chris73

External


Since: Sep 22, 2003
Posts: 1



(Msg. 1) Posted: Mon Sep 22, 2003 7:42 am
Post subject: S2668: IRQ question
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
I need to have a PCI slot which doesn't share IRQs with others
but up until now I was not able to do this on this board...every
slot seems to share IRQs?! Unfortunately, Tyan doesn't provide
any info in the manual.

TIA for all replies!

 >> Stay informed about: S2668: IRQ question 
Back to top
Login to vote
Blaedmon

External


Since: Jul 03, 2003
Posts: 82



(Msg. 2) Posted: Mon Sep 22, 2003 3:57 pm
Post subject: Re: S2668: IRQ question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
what you can do is unload your system-type driver and load it in as
'standard Pc'. In device manager, see what it says under 'computer'. If its
anything but 'standard pc' then your Os will use auto-irq config which is
the problem. Theres a number of ways you can get arpound this, but I found
this way to be the best. Setting computer-type to standard pc lets YOU
choose what irq's go where.

"Chris" <saulus.RemoveThis@netway.at> wrote in message
news:3f6e61ab$0$23046$91cee783@newsreader02.highway.telekom.at...
 > I need to have a PCI slot which doesn't share IRQs with others
 > but up until now I was not able to do this on this board...every
 > slot seems to share IRQs?! Unfortunately, Tyan doesn't provide
 > any info in the manual.
 >
 > TIA for all replies!
 >
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: S2668: IRQ question 
Back to top
Login to vote
Walter H.

External


Since: Oct 12, 2003
Posts: 10



(Msg. 3) Posted: Sun Oct 12, 2003 8:07 am
Post subject: Re: S2668: IRQ question [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Chris wrote:

 > I need to have a PCI slot which doesn't share IRQs with others
 > but up until now I was not able to do this on this board...every
 > slot seems to share IRQs?! Unfortunately, Tyan doesn't provide
 > any info in the manual.
 >

Activate APIC in BIOS - this feature expands the number of IRQs;

which Operating System do you use?

if WinNT/2K/XP/2K3 use the MPS (Uni/Multi)Processor HAL

Walter H.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: S2668: IRQ question 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
TYAN S2668 - I have a Turbo Pascal BGI programme, which shows the default font and this is shown with invalid character type mapping; does anybody why and how to go around this Walter

S2668 - BIOS v1.03 - I already flashed my BIOS, no problems, no need of resetting cmos ram; do not disable the USB, if so, the ps/2 mouse port and the onboard sound is also disabled! Walter

S2668 with one Xeon - Will this board work with one Xeon only? Thanks

Tiger i7505 (S2668) - After upgrading my BIOS to 1.02 (tried 1.03, too), the BIOS now recognizes USB HDDs to boot from. The problem is, after the first reboot of XP being installed on the USB hard drive, the setup program gives a blue screen with Stop 7B error. This is after....

s2668: VCore 2.CPU to high (2,58V) - Have this mainboard with 2 Xeon 3.06 (same brand) The VCore of the 2. CPU is with 3 different programms (Sandra, Dr.Hardware, MainboardMonitor 5) shown with 2.58 V - very much to high, normaly 1,5 V like the 1. CPU. I wrote to Tyan and they told me it i...
   Hardware Problem Solving Community! (Home) -> Tyan All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]