Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

S2696 PCI 32 problem

  
   Hardware Problem Solving Community! (Home) -> Tyan RSS
Related Topics:
s2696 question - hi, I'm trying to connect the j7 front panel header but I can't tell on the which side is pin 1 or which is pin 30 If it says it on the it must be because I can't see it thanks

2466 problem - All, Back in February, I got a 2466-4M to replace a dying 1836GX. At the time, I could only afford 1 MP 2000+, so I installed that and it's been working smoothly ever since. Recently, I got the funds to add a second MP 2000+, and I started..

1854 windows98SE problem - I have an 1854 with Windows98 SE. My primary hard drive was 10 g, my secondary was 40G, and I had a 9G scsi as the third physical drive. All worked well, but I noted the primary drive had a large number of bad sectors. This weekend, all of a sudden I..

NON matching cpu problem - Running 2 x 2400 mp's on a tyan tiger for almost a year without the very 3 times ? ) "non matching cpu's, press f1 to continue in Well now I'm getting that a lot. I did a complete reinstall of windows 2..

stupid problem - I have a s1571 board (I think that's the # it's old) my serial mouse died, so I got a ps2 mouse with the adapter (for free) and windows 98se will not find it I tried I could think of, and I swear I had one on it before that used the adapter..
Next:  Tyan: Fastest processors for a Tyan Tiger i7505 ??  
Author Message
dotcoms

External


Since: Sep 23, 2007
Posts: 1



(Msg. 1) Posted: Sun Sep 23, 2007 2:24 am
Post subject: S2696 PCI 32 problem
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
I tried to add the capture card (canopus RT) to my itempest5000xt - PCI
32 slot, but the system didn't detact the card. This is the first time i
plug the card to PCI 32. Should I set any jumper or bios. Need help pls.
Thx.

 >> Stay informed about: S2696 PCI 32 problem 
Back to top
Login to vote
Mark Morreau

External


Since: Sep 23, 2007
Posts: 2



(Msg. 2) Posted: Sun Sep 23, 2007 11:56 am
Post subject: Re: S2696 PCI 32 problem [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
dotcoms wrote:
> I tried to add the capture card (canopus RT) to my itempest5000xt - PCI
> 32 slot, but the system didn't detact the card. This is the first time i
> plug the card to PCI 32. Should I set any jumper or bios. Need help pls.
> Thx.
>
>


I have a Canopus DVStorm 2 in the PCI 32 slot of my S2696 and it works
fine in WinXPSP2. I didn't have to set anything special in bios. What
operating system are you using? Have you installed the drivers?

 >> Stay informed about: S2696 PCI 32 problem 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Tyan All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]