Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

SATA for 7NJL6?

  
   Hardware Problem Solving Community! (Home) -> Chaintech RSS
Next:  Skippy USB on A8N Premium  
Author Message
Zilla

External


Since: Jul 01, 2005
Posts: 5



(Msg. 1) Posted: Sat Jul 02, 2005 9:05 pm
Post subject: SATA for 7NJL6?
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)
I'm building an HTPC and considering SATA HDs in raid 0 configuration.
Is this interface raliable on this board?

-Zilla

 >> Stay informed about: SATA for 7NJL6? 
Back to top
Login to vote
uddarts




Joined: Jun 15, 2005
Posts: 249



(Msg. 2) Posted: Sun Jul 03, 2005 4:10 am
Post subject: Re: SATA for 7NJL6? [Login to view extended thread Info.]
Quote:
On-board SATA RAID controller

Build-in nForce2 MCPS supports 2 serial ATA device for the highest data transfer rates(1.5Gbps burst) with RAID 0/1 solution


http://www.chaintechusa.com/tw/eng/product_spec.asp?MPSNo=13&PISNo=277

yes


ud

 >> Stay informed about: SATA for 7NJL6? 
Back to top
Login to vote
Zilla

External


Since: Jul 01, 2005
Posts: 5



(Msg. 3) Posted: Sun Jul 03, 2005 7:52 pm
Post subject: Re: SATA for 7NJL6? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
uddarts wrote:
>>On-board SATA RAID controller
>>
>> Build-in nForce2 MCPS supports 2 serial ATA device for the
>>highest data transfer rates(1.5Gbps burst) with RAID 0/1 solution
>
>
> http://www.chaintechusa.com/tw/eng/product_spec.asp?MPSNo=13&PISNo=277
>
> yes
>
>
> ud
>

I did NOT ask if it's "available" (I know it IS); I asked if it was
"reliable"! Thanks.

-Zilla
 >> Stay informed about: SATA for 7NJL6? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
7NJL6 - which OS? - Although I've had quirks, probably mostly Mr.Bill, I had what seemed a pretty darned good system, except not getting USB2 to function at high speed. This was under SE. Alas it went south before I got a recovery setup and my main partition got really..

7NJL6 and Mobile XP - The 7NJL6 board isn't reading my 3000+ XP-M correctly. Looks like the bios doesn't support it. Is there a custom bios out there for XP-M chips?

7NJL6 Problem - I just bought the 7NJL6 and an AMD 2900+ processor. I installed everything from my old machine onto this new board and cpu. The machine will boot up, go through POST, will let me enter bios, will check everything and then ask how I want to load windows.....

Another 7NJL6 Problem - Hey guys and gals, I'm new here so bear with me please. Anyhow, my system specs are as follows 7NJL6 Mobo x2 512 ddr 400 ram strips AMD 3000+ cpu 450w psu geforce 6600 256ddr vid card WinXP SP2 OS Creative 5.1 sound (all peripheral drivers are up to..

DDR 3200 & 7NJL6- only 200Mhz??? - I just bought an Athlon XP 3000+ and was stoked b/c my ram (Kingmax DDR 3200) would run at 400mhz. However it apears that my ram is only running at 200Mhz. What is up with that? How can I get it to run at 400Mhz like it is supposed to?
   Hardware Problem Solving Community! (Home) -> Chaintech All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]