Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Tyan Thunder 100 (GX)

  
   Hardware Problem Solving Community! (Home) -> Tyan RSS
Related Topics:
Tyan Thunder X - S1952DLU - Hi! Does anyone know for sure if this board supports Xeon faster than 550Mhz? The online jumper settings only go as far as x5.5 but it seems to be plenty of room for faster I was interest on x7 for running 700Mhz..

support sites for tyan thunder 2500 ! - Hello! to All Board is installed and running to an extent. However, installed 80 Gig Seagate drive but not seeing drive. Trying to figure it out, but no clue at this point. Any will do. Thanks! -- Rogelio Baptiste

I/O panel for Tyan S2462 Thunder K7 - I bought a used Tyan S2462 Thunder K7 and need an I/O panel for the case I have (Antec SX1000II Series). Does anyone have one or know how I could get one? You may e-mail me direct if you wish. Thanks very much, Kevin

PCI Revision on a Tyan Thunder 2500 S1876 ? - I would like to upgrade my hard disk system, and in doing so, would like to know the PCI level of the board. I am hoping it is 2.2. On a related note, anyone running one with a Promise sx4000? better card? Thanks. -- Woodsy, Off the Grid,..

Tyan Thunder 251x V1.03 and booting off cd - I just bought three identical second user 1U servers. The have Tyan Thunder 251x V1.03 and are running Amibios 7.00. The servers all have an ATAPI CDROM and floppy. My problem is that none of the servers will boot off cdrom of..
Next:  Platform Signature-BIOS Fash Error Messg  
Author Message
Trepliev

External


Since: Nov 02, 2003
Posts: 3



(Msg. 1) Posted: Sun Nov 02, 2003 5:42 am
Post subject: Tyan Thunder 100 (GX)
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
Heya

I'm wondering where I can find the mythical beta bios for the s1836 board
that includes the Coppermine microcode and updated ACPI support?

Thanks,
-Dave

 >> Stay informed about: Tyan Thunder 100 (GX) 
Back to top
Login to vote
squared root

External


Since: Nov 02, 2003
Posts: 28



(Msg. 2) Posted: Mon Nov 03, 2003 12:49 am
Post subject: Re: Tyan Thunder 100 (GX) [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Did you happen find out about it from this page?

<a style='text-decoration: underline;' href="http://www.arrakis-ttm.com/tyan/tyan1836.html" target="_blank">http://www.arrakis-ttm.com/tyan/tyan1836.html</a>


,)`Q



On Sun, 02 Nov 2003 02:42:57 GMT, "Trepliev" <trepliev.TakeThisOut@hotmail.com>
wrote:

 >Heya
 >
 >I'm wondering where I can find the mythical beta bios for the s1836 board
 >that includes the Coppermine microcode and updated ACPI support?
 >
 >Thanks,
 >-Dave
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: Tyan Thunder 100 (GX) 
Back to top
Login to vote
Trepliev

External


Since: Nov 02, 2003
Posts: 3



(Msg. 3) Posted: Sat Nov 08, 2003 12:01 am
Post subject: Re: Tyan Thunder 100 (GX) [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Indeedy so. I've got two Coppermine 866EB's from my now very dead VP6
system, and have been monkeying about trying to get them to fly as a upgrade
to my venerable ol' Thunder 100.

Regards,
-Dave

"squared root" <squaredroot RemoveThis @complexeqn.edu> wrote in message
news:trjbqv4jc5amdsmoas9bci10v698h508jh@4ax.com...
 > Did you happen find out about it from this page?
 >
<font color=purple> > <a style='text-decoration: underline;' href="http://www.arrakis-ttm.com/tyan/tyan1836.html</font" target="_blank">http://www.arrakis-ttm.com/tyan/tyan1836.html</font</a>>
 >
 >
 > ,)`Q
 >
 >
 >
 > On Sun, 02 Nov 2003 02:42:57 GMT, "Trepliev" <trepliev RemoveThis @hotmail.com>
 > wrote:
 >
  > >Heya
  > >
  > >I'm wondering where I can find the mythical beta bios for the s1836 board
  > >that includes the Coppermine microcode and updated ACPI support?
  > >
  > >Thanks,
  > >-Dave
  > >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Tyan Thunder 100 (GX) 
Back to top
Login to vote
Trepliev

External


Since: Nov 02, 2003
Posts: 3



(Msg. 4) Posted: Sat Nov 08, 2003 10:17 pm
Post subject: Re: Tyan Thunder 100 (GX) [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
For those also looking (though highly unlike considering how old this board
is...) Apparently the BIOS's etc can all be found at
<a style='text-decoration: underline;' href="http://spoof3d.com/projects/hardware/tyan/1836DLU/" target="_blank">http://spoof3d.com/projects/hardware/tyan/1836DLU/</a>

I'm going to try this out with my PIII-866EB FCPGA's later today.

Regards,
-Dave

"Trepliev" <trepliev.TakeThisOut@hotmail.com> wrote in message
news:1LTqb.337604$9l5.119732@pd7tw2no...
 > Indeedy so. I've got two Coppermine 866EB's from my now very dead VP6
 > system, and have been monkeying about trying to get them to fly as a
upgrade
 > to my venerable ol' Thunder 100.
 >
 > Regards,
 > -Dave
 >
 > "squared root" <squaredroot.TakeThisOut@complexeqn.edu> wrote in message
 > news:trjbqv4jc5amdsmoas9bci10v698h508jh@4ax.com...
  > > Did you happen find out about it from this page?
  > >
<font color=green>  > > <a style='text-decoration: underline;' href="http://www.arrakis-ttm.com/tyan/tyan1836.html</font" target="_blank">http://www.arrakis-ttm.com/tyan/tyan1836.html</font</a>>
  > >
  > >
  > > ,)`Q
  > >
  > >
  > >
  > > On Sun, 02 Nov 2003 02:42:57 GMT, "Trepliev" <trepliev.TakeThisOut@hotmail.com>
  > > wrote:
  > >
   > > >Heya
   > > >
   > > >I'm wondering where I can find the mythical beta bios for the s1836
board
   > > >that includes the Coppermine microcode and updated ACPI support?
   > > >
   > > >Thanks,
   > > >-Dave
   > > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Tyan Thunder 100 (GX) 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Tyan All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]