|
Related Topics:
| ATX connector welded to Tyan Tiger MP S2460; can it happen.. - This was the machine as it was: - Tiger MP S2460 - 2x Athlon MP 1600+ - 2x PC Power and Cooling CPU Cool AG - 2x Kingston 256MB PC2100 SDRAM - ATI Radeon 8500 (+ fan) - Hollywood Plus MPEG decoder - SBLive!..
Tyan Tiger MB S2460 rev 1.03 - Floppy error. - Hi all, I have a Tyan Tiger mb S2460 rev 1.03, which refuses to recognise the floppy drive. After doing a bit of googling, it is apparent that it might be some sort of power problem to the floppy, so following the I connected the floppy to a..
Tyan Tiger S2460 memory problem - Quick one, I have a tyan tiger mp s2460, bought in november 2001. Memory is Crucial ECC 256mb chips (4 of), one in each slot power supply is a 500w affair, I have cooling fans one each of the 2 AMD 1.2GB MP chips, and front and rear of the..
Tyan Tiger MPX won't boot up (blank screen) - hi y'all, i've got a problem with my tyan tiger mpx the system ran quite well for 2 years (24/7). i shut the system down and from that point on, i haven't been able to bring it back up again. system: dual athlon xp 1800+ as..
Tiger S2460 - hello, the website says the board works with 1900+ athlons. has anybody tried cpus above 1900+?? i can get cheap athlon mp 2600+ and want to know if they will work. thanks, michael
|
|
|
Next: Tyan: opteron 256
|
| Author |
Message |
External
Since: Aug 31, 2007
Posts: 4
|
(Msg. 1) Posted: Fri Aug 31, 2007 7:22 pm
Post subject: Tyan Tiger MP S2460 Motherboard will not boot
Archived from groups: alt>comp>periphs>mainboard>tyan (more info?)
|
|
|
|
| My systme would not boot. Checking inside power connection welded to
motherboard. Purchased new mother board/power supply. System would
display variable memory but no boot. Purchased/Installed 1Gb of new
memory still no boot no action accept fans spinning???. Any advice
greatly appreciatd! Poor Richard
|
>> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot |
|
| Back to top |
|
 | |
External
Since: Mar 10, 2005
Posts: 57
|
(Msg. 2) Posted: Sat Sep 01, 2007 6:56 am
Post subject: Re: Tyan Tiger MP S2460 Motherboard will not boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
hi ,
what about resetting cmos ? what about displayed post ? please give some
more info .
Poor Richard says...
> My systme would not boot. Checking inside power connection welded to
> motherboard. Purchased new mother board/power supply. System would
> display variable memory but no boot. Purchased/Installed 1Gb of new
> memory still no boot no action accept fans spinning???. Any advice
> greatly appreciatd! Poor Richard
>
>
--
gravity is still active
-<--@
gruss , wolfgang , v. von gunzo |
|
| Back to top |
|
| |
External
Since: Aug 31, 2007
Posts: 4
|
(Msg. 3) Posted: Sat Sep 01, 2007 9:16 am
Post subject: Re: Tyan Tiger MP S2460 Motherboard will not boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Aug 31, 9:22 pm, Poor Richard <rsurd... RemoveThis @comcast.net> wrote:
> My systme would not boot. Checking inside power connection welded to
> motherboard. Purchased new mother board/power supply. System would
> display variable memory but no boot. Purchased/Installed 1Gb of new
> memory still no boot no action accept fans spinning???. Any advice
> greatly appreciatd! Poor Richard
No action available. Cannot access anything. Only 2-fans on CPU's
spinning! >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot |
|
| Back to top |
|
| |
External
Since: Aug 31, 2007
Posts: 4
|
(Msg. 4) Posted: Sun Sep 02, 2007 7:42 am
Post subject: Re: Tyan Tiger MP S2460 Motherboard will not boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Sep 2, 3:47 am, wolfgang schneider <schn... RemoveThis @gmx.net> wrote:
> okay - something is defective !
>
> Poor Richard says...
>
> > On Aug 31, 9:22 pm, Poor Richard <rsurd... RemoveThis @comcast.net> wrote:
> > > My systme would not boot. Checking inside power connection welded to
> > > motherboard. Purchased new mother board/power supply. System would
> > > display variable memory but no boot. Purchased/Installed 1Gb of new
> > > memory still no boot no action accept fans spinning???. Any advice
> > > greatly appreciatd! Poor Richard
>
> > No action available. Cannot access anything. Only 2-fans on CPU's
> > spinning!
>
> --
> gravity is still active
> -<--@
> gruss , wolfgang , v. von gunzo
Thanks for your info. I can only guess that 1 or both cpu's are bad.
Is there any way to test? >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot |
|
| Back to top |
|
| |
External
Since: Mar 10, 2005
Posts: 57
|
(Msg. 5) Posted: Sun Sep 02, 2007 10:47 am
Post subject: Re: Tyan Tiger MP S2460 Motherboard will not boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
okay - something is defective !
Poor Richard says...
> On Aug 31, 9:22 pm, Poor Richard <rsurd... RemoveThis @comcast.net> wrote:
> > My systme would not boot. Checking inside power connection welded to
> > motherboard. Purchased new mother board/power supply. System would
> > display variable memory but no boot. Purchased/Installed 1Gb of new
> > memory still no boot no action accept fans spinning???. Any advice
> > greatly appreciatd! Poor Richard
>
> No action available. Cannot access anything. Only 2-fans on CPU's
> spinning!
>
--
gravity is still active
-<--@
gruss , wolfgang , v. von gunzo >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot |
|
| Back to top |
|
| |
External
Since: Mar 10, 2005
Posts: 57
|
(Msg. 6) Posted: Mon Sep 03, 2007 3:56 am
Post subject: Re: Tyan Tiger MP S2460 Motherboard will not boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
hi ,
if there is only one cpu okay , system will run with it . not very
likely that both cpu are broken .
what about the psu ? why welded to the mb ? my tiger-mpx is fuzzy about
voltages etc. , so maybe replace the powersupply .
Poor Richard says...
> On Sep 2, 3:47 am, wolfgang schneider <schn... DeleteThis @gmx.net> wrote:
> > okay - something is defective !
> >
> > Poor Richard says...
> >
> > > On Aug 31, 9:22 pm, Poor Richard <rsurd... DeleteThis @comcast.net> wrote:
> > > > My systme would not boot. Checking inside power connection welded to
> > > > motherboard. Purchased new mother board/power supply. System would
> > > > display variable memory but no boot. Purchased/Installed 1Gb of new
> > > > memory still no boot no action accept fans spinning???. Any advice
> > > > greatly appreciatd! Poor Richard
> >
> > > No action available. Cannot access anything. Only 2-fans on CPU's
> > > spinning!
> >
> > --
> > gravity is still active
> > -<--@
> > gruss , wolfgang , v. von gunzo
>
> Thanks for your info. I can only guess that 1 or both cpu's are bad.
> Is there any way to test?
>
>
--
gravity is still active
-<--@
gruss , wolfgang , v. von gunzo >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot |
|
| Back to top |
|
| |
External
Since: Aug 31, 2007
Posts: 4
|
(Msg. 7) Posted: Wed Sep 05, 2007 9:00 pm
Post subject: Re: Tyan Tiger MP S2460 Motherboard will not boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
On Sep 3, 1:52 am, wolfgang schneider <schn....RemoveThis@gmx.net> wrote:
> hi ,
>
> if there is only one cpu okay , system will run with it . not very
> likely that both cpu are broken .
>
> what about the psu ? why welded to the mb ? my tiger-mpx is fuzzy about
> voltages etc. , so maybe replace the powersupply .
>
> Poor Richard says...
>
>
>
>
>
> > On Sep 2, 3:47 am, wolfgang schneider <schn....RemoveThis@gmx.net> wrote:
> > > okay - something is defective !
>
> > > Poor Richard says...
>
> > > > On Aug 31, 9:22 pm, Poor Richard <rsurd....RemoveThis@comcast.net> wrote:
> > > > > My systme would not boot. Checking inside power connection welded to
> > > > > motherboard. Purchased new mother board/power supply. System would
> > > > > display variable memory but no boot. Purchased/Installed 1Gb of new
> > > > > memory still no boot no action accept fans spinning???. Any advice
> > > > > greatly appreciatd! Poor Richard
>
> > > > No action available. Cannot access anything. Only 2-fans on CPU's
> > > > spinning!
>
> > > --
> > > gravity is still active
> > > -<--@
> > > gruss , wolfgang , v. von gunzo
>
> > Thanks for your info. I can only guess that 1 or both cpu's are bad.
> > Is there any way to test?
>
> --
> gravity is still active
> -<--@
> gruss , wolfgang , v. von gunzo- Hide quoted text -
>
> - Show quoted text -
Wolfgang I am about to retire my mach not. I have ordered/installed a
new motherboard and power supply and just tried a new 1gb regestered
memory stick. Nothing but the fan motors run. The mach is
6 year old so I guess retirement is deserved. Thanks for all your
advice! Poor Richard. >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot |
|
| Back to top |
|
| |
External
Since: Jul 07, 2004
Posts: 12
|
(Msg. 8) Posted: Sat Sep 15, 2007 10:07 pm
Post subject: Re: Tyan Tiger MP S2460 Motherboard will not boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Poor Richard" <rsurdell DeleteThis @comcast.net> wrote in message
news:1188613338.301921.39720@r29g2000hsg.googlegroups.com...
> My systme would not boot. Checking inside power connection welded to
> motherboard. Purchased new mother board/power supply. System would
> display variable memory but no boot. Purchased/Installed 1Gb of new
> memory still no boot no action accept fans spinning???. Any advice
> greatly appreciatd! Poor Richard
>
What PSU did you replace it with? the s2460 requires a PSU with 30A on the
5v line and many newer ones will not meet this requirement.
Check http://www.fractured.org/support/tyan2460.php as well >> Stay informed about: Tyan Tiger MP S2460 Motherboard will not boot |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in/Register/Password
