Chaintech's VNF3-250 and RAID

FAQ

Profile

Chaintech's VNF3-250 and RAID

Hardware Problem Solving Community! (Home) -> Chaintech

Related Topics:

Chaintech VNF3-250 Anyone on this NG have it? - If you do, does your CMOS have the problem of locking your keyboard when you select USB Mouse support? Thank you for your pertinent Wayne

Chaintech VNF3-250 - Hello, Anyone here using the VNF3-250 and if so what do you think of it? Thanks, Ed

Anyone have a BIOS newer than May 7, 2004 for Chaintech VN.. - I am hoping the answer is yes. To email me, just remove the no and spam from my email address.

Chaintech VNF3-250 updated BIOS dated July 29, 2004 - Go to and get the latest BIOS for this

VNF3-250 setup - Setting up this board in a dual boot config. Stupid me,I didn't prepare either OS before replacing have delted the System Devices first. Now,I've got 4 copies of PCI Satndard Host PCI Bridge and a couple copies of PCI to PCI..

Author

Message

bp4

External

Since: Aug 24, 2004
Posts: 35

(Msg. 1) Posted: Tue Aug 17, 2004 9:46 am
Post subject: Chaintech's VNF3-250 and RAID
Archived from groups: alt>comp>periphs>mainboard>chaintech (more info?)

Does anyone know how to get RAID to work on this board ?

>> Stay informed about: Chaintech's VNF3-250 and RAID

Ugly Mugly1

External

Since: Aug 10, 2004
Posts: 25

(Msg. 2) Posted: Tue Aug 17, 2004 1:18 pm
Post subject: Re: Chaintech's VNF3-250 and RAID [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

bp wrote:
> Does anyone know how to get RAID to work on this board ?

Did you turn it on in the CMOS?

>> Stay informed about: Chaintech's VNF3-250 and RAID

bp4

External

Since: Aug 24, 2004
Posts: 35

(Msg. 3) Posted: Wed Aug 18, 2004 12:00 am Post subject: Re: Chaintech's VNF3-250 and RAID [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

On Tue, 17 Aug 2004 10:18:18 -0500, "Ugly Mugly" <umugly.RemoveThis@nospam.hotmail.com> wrote: >bp wrote: >> Does anyone know how to get RAID to work on this board ? > >Did you turn it on in the CMOS? > Yes Sadly when I do it doesn't boot. With the new BIOS the drives are auto detected on IDE2 MASTER IDE2 MASTER (the new bios adds IDE2 master on both channels instead of master/slave, which make sense for a raid setup). Now if I turn on the IDE raid, only, I can't boot past the window XP startup screen. If I also enable the SATS channels (like I would assume you do to enable the SATS0 and SATS1) the thing won't boot even to the startup screen. If you ask me there's a conflict between the auto detected IDE raid drives and the SATS drives, Oh did I mention the two RAID drives are attached to the SATS ports not the IDE?<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Chaintech's VNF3-250 and RAID

Ugly Mugly1

External

Since: Aug 10, 2004
Posts: 25

(Msg. 4) Posted: Wed Aug 18, 2004 8:10 am Post subject: Re: Chaintech's VNF3-250 and RAID [Login to view extended thread Info.] Archived from groups: per prev. post (more info?)

bp wrote: > On Tue, 17 Aug 2004 10:18:18 -0500, "Ugly Mugly" > <umugly RemoveThis @nospam.hotmail.com> wrote: > >> bp wrote: >>> Does anyone know how to get RAID to work on this board ? >> >> Did you turn it on in the CMOS? >> > Yes > Sadly when I do it doesn't boot. > With the new BIOS the drives are auto detected on IDE2 MASTER IDE2 > MASTER (the new bios adds IDE2 master on both channels instead of > master/slave, which make sense for a raid setup). Now if I turn on the > IDE raid, only, I can't boot past the window XP startup screen. If I > also enable the SATS channels (like I would assume you do to enable > the SATS0 and SATS1) the thing won't boot even to the startup screen. > If you ask me there's a conflict between the auto detected IDE raid > drives and the SATS drives, > > Oh did I mention the two RAID drives are attached to the SATS ports > not the IDE? No, but it shouldn't make a difference. Have you tried going into safemode and then installing the drivers from there?<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: Chaintech's VNF3-250 and RAID

Display posts from previous:

	Hardware Problem Solving Community! (Home) -> Chaintech	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum