Wanted: Tyan S1836 Thunder 100 Beta BIOS

FAQ

Profile

Wanted: Tyan S1836 Thunder 100 Beta BIOS

Hardware Problem Solving Community! (Home) -> Tyan

Next: HD Interface question

Author

Message

Andrew Manore

External

Since: Aug 28, 2004
Posts: 1

(Msg. 1) Posted: Sat Aug 28, 2004 7:36 am Post subject: Wanted: Tyan S1836 Thunder 100 Beta BIOS Archived from groups: alt>comp>periphs>mainboard>tyan, others (more info?)

I am looking for the unreleased beta BIOS for the Tyan S1836DLUAN Thunder 100. This BIOS version reportedly fixed problems with ACPI in Windows 2000 and provided unofficial support for the Slot 1 Pentium III Coppermine CPUs. The original filename as it was when posted on Tyan's FTP site a few years ago was '1836b30.exe'. If anyone has this BIOS, please e-mail it to me as an attachment. Thanks in advance for any assistance! -- Andrew Manore manorea RemoveThis @migate.net >> Stay informed about: Wanted: Tyan S1836 Thunder 100 Beta BIOS

Display posts from previous:

Related Topics:

Tyan Thunder 100 (S1836) Bios Needed - Hello everyone, I've been doing a lot of reading on taking my duelly setup from its current PII 400 to PIII 1Ghz slot 1 coppermines. I'm currently trying to find the B3a bios that a lot of people speak of, but all web links I try are dead. Could..

Tyan Thunder S2510LE 48 bit LBA Bios availability? - I have a Tyan S2510 (without the SCSI) and would like it to work with some large drives that I already own (160G) and the mobo seems to only see the first 120G. Is it possible to flash the bios to correct this? If so, where to find this, the Tyan site..

Tyan Thunder K8W S2885 - Can't get Highpoint BIOS and SI S.. - Might be a stupid question, but... Mainboard is a K8W S2885 that has a Silicon Image 3114 chip onboard. I have added a Highpoint 1820A SATA RAID controller card into one of the PCI-X slots. When I have the CMOS settings configured to scan "Last to...

Tyan Thunder 100 (GX) - Heya I'm wondering where I can find the mythical beta bios for the s1836 board that includes the Coppermine microcode and updated ACPI support? Thanks, -Dave

Tyan Thunder X - S1952DLU - Hi! Does anyone know for sure if this board supports Xeon processors faster than 550Mhz? The online jumper settings only go as far as x5.5 but it seems to be plenty of room for faster settings... I was particularly interest on x7 for running 700Mhz..

	Hardware Problem Solving Community! (Home) -> Tyan	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum