Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

advice on the best tools and connectors to terminate my ow..

 
   Hardware Problem Solving Community! (Home) -> PC Networking RSS
Next:  Integrated network card  
Author Message
Ian R

External


Since: Mar 28, 2006
Posts: 52



(Msg. 1) Posted: Wed Jan 17, 2007 1:17 am
Post subject: advice on the best tools and connectors to terminate my own cables
Archived from groups: comp>sys>ibm>pc>hardware>networking (more info?)

Hi

I'd like to hard wire my home by running CAT5 cables.

These will need terminating and I've read numerous articles about using the
best crimp tools and connectors you can afford - but one of them mention any
brand names or suppliers.

So I'd appreciate your recommendations for the best type of crimp tool to go
for, which makes of connectors and suppliers. As they say I only want to do
this once so I want to do it right.

I live in the UK.

Thanks for your time.

Ian

 >> Stay informed about: advice on the best tools and connectors to terminate my ow.. 
Back to top
Login to vote
sales

External


Since: Jan 18, 2007
Posts: 1



(Msg. 2) Posted: Thu Jan 18, 2007 12:33 am
Post subject: Re: advice on the best tools and connectors to terminate my own cables [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Ian R wrote:
> Hi
>
> I'd like to hard wire my home by running CAT5 cables.
>
> These will need terminating and I've read numerous articles about using the
> best crimp tools and connectors you can afford - but one of them mention any
> brand names or suppliers.
>
> So I'd appreciate your recommendations for the best type of crimp tool to go
> for, which makes of connectors and suppliers. As they say I only want to do
> this once so I want to do it right.
>
> I live in the UK.
>
> Thanks for your time.
>
> Ian

Hi Ian,

You are right you should go for good quality Crimp Tools - I use
Elpress or CK do a good quality Cat 5 Crimper.
I get them from a site that specialises in Crimp Tools at
www.thecrimpcompany.com or see the Elpress site at www.elpress-uk.com

Hope this helps

Monty

 >> Stay informed about: advice on the best tools and connectors to terminate my ow.. 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Embedded tools are 10% off to celebrate 25th Aniversary - COMSOL is celebrating its 25th birthday --- not many companies can claim that in our industry. So we are starting what we hope will be an exciting year with a 10% discount on selected products available from our web shop. These include:- C..

Free: Antiques Roadshow - BNC Connectors - Have 4 Ts and 1 straight. If you want these antiques, they're yours for postage. Please don't reply to group, I don't monitor it. (remove asterisks from reply-to address)

I need advice on expansion please - I have an Allied-Telesyn AR-220E 4-port Router/switch, (cable modem connected to the WAN port), with a Allied-Telesyn 4-port MR904TX hub connected via the uplink port on the router and the MDI-X port on the hub. I need to connect more computers and woul...

Need advice on Wireless NIC - My apt's roof was damaged by Rita. The whole building has bad water damage, and every apt will have to be "gutted". I'll be living at my brother's for the coming months. He has 2 PCs sharing the cable modem over a NetGear MR814 v3 Wirless B ro...

need router advice - currently have a D-Link DI-713P, keep getting dropped signals and what appears to be an intermittent connection to the ethernet card. changed cable, same problem, will request cable tech to check signal level. would like to replace (if required) with one...
   Hardware Problem Solving Community! (Home) -> PC Networking All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]