allocating disk space for RAID by using partion magic 8

FAQ

Profile

allocating disk space for RAID by using partion magic 8

Hardware Problem Solving Community! (Home) -> ABIT

Next: Resolution FX5200

Author

Message

mamtim

External

Since: May 14, 2007
Posts: 1

(Msg. 1) Posted: Mon May 14, 2007 4:55 am Post subject: allocating disk space for RAID by using partion magic 8 Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

i would like to ask for your opinion with the following issue: migrated my RAID array by adding two new hard disks to a single logical drive.The migration was successful.Now i have some GIGAS of unallocated space i'd like to join to existing logical drive. Did anyone actually perform this kind of work with Partition Magic?Is it recommendable? Thank you. >> Stay informed about: allocating disk space for RAID by using partion magic 8

Display posts from previous:

Related Topics:

NF7-S SATA RAID-0, WD-SE: Anyone wanna compare disk benchm.. - Greetings Abit and Storage Newsgroup, I have just had a bit of spare time to finally do some proper tests on my SATA RAID-0 set-up. I was hoping that some of you out there would be able to run some tests yourself so we can compare results. Doesn't..

si3132 disappears after standby raid disk unavailable - i've got a aw8max mobo and i'm trying to use the si3132 raid controller. first of all, if i have it configured in the bios to be IDE, windows doesn't boot, and if i specify raid, (windows boots and i can configure a jbod for the one disk i have..

KT7A-RAID, Highpoint detects wrong disk size - I've flashed the latest ABIT BIOS (A9) modded with the latest Highpoint Driver. When I Ctrl-H into the Highpoint setup, it is detecting my 120GB Maxtor drives as only 9MB. I have each drive connected to a seperate channel. Both drives are detected..

Unallocated space: What's wrong? - I've installed a 200 GB hard drive, but it's capacity is listed as 131 GB. However, I went to device manager and checked it's properties, and it states that there exists 63 GB worth of 'unallocated space'. What's this mean, exactly? Can it be recovered?....

Disk conflict - I got a SATA disk for my ic7 and installed Windows which worked fine but then I connected an old hard disk (not SATA) and it won't boot because drive letters have changed. I looked in the BIOS and the SATA disk is in channel 3 instead of channel 1 which....

	Hardware Problem Solving Community! (Home) -> ABIT	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum