Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

1.4 athlon thunderbird in k7vta-b

 
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Related Topics:
K7VTA Pro and Athlon XP 2100+ - Recently upgraded to an AMD Athlon XP 2100+ in my K7VTA Pro (bios 2AA7). It runs at the correct speed but shows as CPU during boot. I'm also having stability issues. Same hardware runs stably and well (though not too fast) with..

Best videocard for K7VTA PRO 1.0 w/ Athlon 2000+? - Which videocard do you recommend for an Athlon 2000+ with 640 MB PC133 RAM on a Soyo K7VTA PRO 1.0 (AGP 2.0 4x, VIA KT133A chipset)? My old trusty voodoo3 is useless now. I will NOT the system, just the I suppose..

K7VTA Pro V1.0, Athlon XP 1800+ Trouble - I have a K7VTA Pro V1.0 with an Athlon XP 1800+ I was running it with the CPU FSB at 100MHz (I didn't bother changing it when I first set it up.) I recently tried putting the FSB to 133MHz so that the processor could run at it's..

SY K7VTA Pro - I just bought a new Seagate 250 gig UDMA hard drive and installed it to my PC. It ran fine for a day but when I went to boot up, it didn't. I had to reload Windows and then after a day it did the same thing. It stops at DMI Pool (I think..

Anybody Know Where I Can Get a K7VTA Pro? - My SOYO K7VTA Pro failed Sunday and I'd like to get an exact so I don't have to re-buy memory or reinstall XP. -- jim
Next:  Soyo: 8x graphics card on 4x MOBO  
Author Message
awrightus

External


Since: Jan 14, 2005
Posts: 1



(Msg. 1) Posted: Sun Jan 21, 2007 8:45 pm
Post subject: 1.4 athlon thunderbird in k7vta-b
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)

I've had a 1.2 Athlon in my K7VTA-B for years. I came across a 1.4 and
haven't been able to get it to work in the K7VTA-B. I know the CPU is good
because it works in another motherboard. I have the latest bios (K7VTA-B
_2BA1). No luck setting the multiplier to auto or manual. The manual dip
switch settings (per the manual) only go up to 12.5, so I figured with the
latest bios that with a 1.4, you'd have to have it set to auto. Anyway, no
matter what I've tried, when I turn the computer on, I get the bios voice
announcement that the cpu may be bad. Tried clearing cmos in between
changes and that hasn't helped either. The Soyo web site says that the max
cpu in the K7VTA-B is a 1.4 Thunderbird, so I suppose in theory it's
supported. Just wondering if anyone has had success getting a 1.4
Thunderbird working in a K7VTA-B, and if so what motherboard settings were
used. Thanks.

Steve

 >> Stay informed about: 1.4 athlon thunderbird in k7vta-b 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]