|
Related Topics:
| Weird acting power-on button and AN19E - Hi All, I have a AN19E that has the latest BIOS, from a warranty repair. the power-on works like this: (A) Very, very soft touch = great bootup (I may have to try this twice cuz if I push too hard 'B' happens (B) Push button till you hear click =..
AU13 doesn't boot.... - I bought a couple AU13s from fry's and can't get them to show the boot up screen. I have tried every memory, power supply, video card, monitor, etc... My setup is as follows : 512M DDR mem, ATX 350W..
AU13 boot problems - Hi everyone; In an attempt to solve what appeared to be a failing I replaced my old ASUS KT7 with a FIC AU13 with a 2600mHz AMD cpu. I replaced the power supply because my old one did not have the 4 pin 12V connector that the..
AU13 BIOS - I have a FIC AU13 with BIOS TFA402, 3/24/03. I am looking for an upgraded BIOS for Athlon XP 1800 to use with Windows 98-SE. Please let me know is one is available and where to find it. TIA RE
AU13 cannot install Win XP - Each time I try to install XP onto this mobo I get cyclic reboots due to driver I switched out every component except the cpu. It will boot in safe mode. Anyone else have this prob and possibly a solution? Thanks
|
|
|
Next: FIC: FIC PA-2013, Promise Ultra 100, & Windows 98SE
|
| Author |
Message |
External
Since: Oct 14, 2003
Posts: 1
|
(Msg. 1) Posted: Wed Oct 15, 2003 12:38 am
Post subject: au13 acting weird on boot
Archived from groups: alt>comp>periphs>mainboard>fic (more info?)
|
|
|
A friend built a computer for me based on the maximumpc lean machine.
FIC AU13
512 meg ram DDR 400
120 gig WD
WIN XP PRO
I have been having booting problems for the past week...
Sometime it will boot into the os, other times it freezes up during
post, other times it is very slow to find drives and won't boot in the
os
My friend was afraid I got a virus, so he was trying to boot from
floppy boot disk and/or winxp, but it won't even boot to that.
Could I have gotten a bad MOBO?
If so, is FIC good about replacements??
Is there a way to test the MOBO and know for sure if it is good or
bad??
TIA
DJ |
|
| Back to top |
|
 | |
External
Since: Oct 15, 2003
Posts: 5
|
(Msg. 2) Posted: Wed Oct 15, 2003 5:59 am
Post subject: Re: au13 acting weird on boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
I have an AU13 and its a great stable board, sounds to me like a bios
setting may be wrong. Post more specifics about your system, like what
processor, etc.
Memory timings could be set too aggresively or something like that. Did
your friend overclock anything?
Brian
"Joey jo jo jr. shabadoo" <drummerjoe66 RemoveThis @yahooSPAMSUX.com> wrote in message
news:eecpovk017k31s1489bhb2ja7qmfh1mu8u@4ax.com...
> A friend built a computer for me based on the maximumpc lean machine.
>
> FIC AU13
> 512 meg ram DDR 400
> 120 gig WD
> WIN XP PRO
>
> I have been having booting problems for the past week...
> Sometime it will boot into the os, other times it freezes up during
> post, other times it is very slow to find drives and won't boot in the
> os
>
> My friend was afraid I got a virus, so he was trying to boot from
> floppy boot disk and/or winxp, but it won't even boot to that.
>
> Could I have gotten a bad MOBO?
>
> If so, is FIC good about replacements??
>
> Is there a way to test the MOBO and know for sure if it is good or
> bad??
>
> TIA
>
> DJ
>
>
><!-- ~MESSAGE_AFTER~ --> |
|
| Back to top |
|
| |
External
Since: May 14, 2004
Posts: 181
|
(Msg. 3) Posted: Wed Oct 22, 2003 9:08 pm
Post subject: Re: au13 acting weird on boot [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
Unlike the rest of the world, Western Digital hard drives have a
jumper setting for "Single" device, as opposed to "Master" or "Slave". If
the hard drive is the only IDE device on the cable, make sure it is set to
"Single".
--Alex
"Joey jo jo jr. shabadoo" wrote:
> A friend built a computer for me based on the maximumpc lean machine.
>
> FIC AU13
> 512 meg ram DDR 400
> 120 gig WD
> WIN XP PRO
>
> I have been having booting problems for the past week...
> Sometime it will boot into the os, other times it freezes up during
> post, other times it is very slow to find drives and won't boot in the
> os
>
> My friend was afraid I got a virus, so he was trying to boot from
> floppy boot disk and/or winxp, but it won't even boot to that.
>
> Could I have gotten a bad MOBO?
>
> If so, is FIC good about replacements??
>
> Is there a way to test the MOBO and know for sure if it is good or
> bad??
>
> TIA
>
> DJ<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: au13 acting weird on boot |
|
| Back to top |
|
| |
|
FAQ
Search
Profile
Private Messages
Log in/Register/Password
