Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

abit be6-II

 
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Next:  Trade ABIT Secure IDE for Serillel II  
Author Message
redsnapper

External


Since: Feb 05, 2004
Posts: 2



(Msg. 1) Posted: Thu Feb 05, 2004 4:30 pm
Post subject: abit be6-II
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

hi, i have a pIII pc with a mainboard abit be6-II.
i think the mainboard supports agp 2x, supplying 3.3 V (not sure)
which graphics cards (above riva tnt2) does is support?
thanks..

 >> Stay informed about: abit be6-II 
Back to top
Login to vote
DaveL

External


Since: Nov 23, 2003
Posts: 617



(Msg. 2) Posted: Thu Feb 05, 2004 4:30 pm
Post subject: Re: abit be6-II [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

I know for a fact it will support any GF, GF2, GF3, GF4. As far as FX cards
go, it will take the lower cards. I don't know about the 5900 and up.
Might run into an AGP slot power issue. Just buy your card from a place
with a good return policy and try it. A PIII can't really use much more
than a GF4 ti4xxx anyway, so that would be a good upgrade, or how about an
FX5600 Ultra.

Dave


"redsnapper" <redsnapper @ phreaker.net> wrote in message
news:bvt9gu$10hokr$1@ID-223497.news.uni-berlin.de...
 > hi, i have a pIII pc with a mainboard abit be6-II.
 > i think the mainboard supports agp 2x, supplying 3.3 V (not sure)
 > which graphics cards (above riva tnt2) does is support?
 > thanks..
 >
 ><!-- ~MESSAGE_AFTER~ -->

 >> Stay informed about: abit be6-II 
Back to top
Login to vote
redsnapper

External


Since: Feb 05, 2004
Posts: 2



(Msg. 3) Posted: Fri Feb 06, 2004 12:33 pm
Post subject: Re: abit be6-II [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

ok, i'll test'em out.

thanks.

"DaveL" <dave1027.DeleteThis@comcast.net> wrote in message
news:OJidnYIIY51J97_dRVn-uA@comcast.com...
 > I know for a fact it will support any GF, GF2, GF3, GF4. As far as FX
cards
 > go, it will take the lower cards. I don't know about the 5900 and up.
 > Might run into an AGP slot power issue. Just buy your card from a place
 > with a good return policy and try it. A PIII can't really use much more
 > than a GF4 ti4xxx anyway, so that would be a good upgrade, or how about an
 > FX5600 Ultra.
 >
 > Dave
 >
 >
 > "redsnapper" <redsnapper @ phreaker.net> wrote in message
 > news:bvt9gu$10hokr$1@ID-223497.news.uni-berlin.de...
  > > hi, i have a pIII pc with a mainboard abit be6-II.
  > > i think the mainboard supports agp 2x, supplying 3.3 V (not sure)
  > > which graphics cards (above riva tnt2) does is support?
  > > thanks..
  > >
  > >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: abit be6-II 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Abit AI7 no boot - I've built my own computers since the BH6 celeron 300@450 days. Just got a new AI7 with a P4c @2.8, 2 sticks of Musklin PC3500 level II and a Radeon 9600XT. Get a repeating long beep, no video and the code 'AF' with both the green and red lights on. Have...

ABIT FlashMenu 1.32 - FYI, http://fae.abit.com.tw/eng/download/dl_flashmenu.htm FlashMenu 1.32 released.

ABIT IT7 and the BSOD....(again and again) - Lately (last month) my Abit IT7 w/P4 1.6 has been cranky. Had to reinstall W2K right before Christmas and this past weekend after installing a DVD burner the BSOD returned. Was unable to even reinstall W2K from boot CD, getting the infamous "If th...

Fan Requirements Abit KD7 - I just got this board with an Athlon XP 2400 CPU. I realize--oops--I forgot the heatsink fan. I have a leftover one which I used with no problems on a Celeron 500 MHz. It's a pretty thick sucker. Is that fan likely good enough, or do Athlon XPs have..

New ABIT EQ Utility 1.10W - New ABIT EQ Utility 1.10W http://fae.abit.com.tw/eng/download/dltools.htm Models: ..BD7III / BE7 / BE7II / BH-71 / BX7 ..IC7 / IC7-G / IC7-MAX3 ..IS7 / IS7-E / IS7-G / IS7-L / IS7-M / IS7-V ..KD7A / KV7 / VA-10 / VI7 / VT7 ..NF7-S / NF7 / NF7-M ...
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]