Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

why is there a cable from AUXFAN1 to PSU?

 
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Related Topics:
What's the best way to unplug IDE cable from mobo w/out da.. - Hi, What is the best way to unplug the IDE and floppy cables from the without damaging them? In the past I've always had cables to use so I just pulled on the ribbon cable itself, but this time I need to reuse the cables. I'm..

Can I use a cable select for master/slave hookup? - I have an Abit KT7A Raid mobo. I changed cases with basically the same parts. The only thing new is that I took out a SCSI card I was using for a CD Burner and added an ATAPI CD burner. Because of my drive being already mounted on 5.25 rails I just put

Can I connect IDE cable in reverse (distance between conne.. - Hi All, Sorry for the silly question but I'm new in this. I need to connect 2 IDE devices that are not close to each other (HD and a CD) (my second ide already got 2 devices connected to it). My question is: Can I connect the cable in reverse..

Running Dual Boot with 98SE and XP Pro SP1 - I have a dual boot system on an Abit BD7II-R with 98SE on an old Seagate ATA33 HDD on Primary IDE 1 Master and a Lite-On CD-RW Primary Slave. Secondary IDE 2 Master is a LG GSA-4040B DVD-RAM with NO slave. My WinXP Pro is on Primary IDE 3 & 4 as a RAI

NF7-S SATA RAID-0, WD-SE: Anyone wanna compare disk benchm.. - Greetings Abit and Storage I have just had a bit of spare time to finally do some proper tests on my SATA RAID-0 set-up. I was hoping that some of you out there would be able to run some tests yourself so we can compare results. Doesn't..
Next:  7.11 drivers still haven't fixed problem  
Author Message
Jeff

External


Since: May 20, 2007
Posts: 18



(Msg. 1) Posted: Sat Nov 24, 2007 5:10 am
Post subject: why is there a cable from AUXFAN1 to PSU?
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

Hey

I've got a IS7 mobo. I was about to connect a fan to the AUXFAN1 on the
mobo, but to my surprise AUXFAN1 is already in use. There goes tiny cable
from the PSU (Chieftec 360W) to this AUXFAN1.

Any ideas what this cable from PSU to AUXFAN1 are doing?

 >> Stay informed about: why is there a cable from AUXFAN1 to PSU? 
Back to top
Login to vote
newsnet

External


Since: Dec 21, 2004
Posts: 73



(Msg. 2) Posted: Sat Nov 24, 2007 7:01 am
Post subject: Re: why is there a cable from AUXFAN1 to PSU? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

"Jeff" <it_consultant1.RemoveThis@hotmail.com.NOSPAM> wrote in message
news:Qrydnf7kqcwfetra4p2dnAA@telenor.com...
> Hey
>
> I've got a IS7 mobo. I was about to connect a fan to the AUXFAN1 on
> the mobo, but to my surprise AUXFAN1 is already in use. There goes
> tiny cable from the PSU (Chieftec 360W) to this AUXFAN1.
>
> Any ideas what this cable from PSU to AUXFAN1 are doing?
>

Jeff

It could well be informing the bios/motherboard about the revs/min of
the
fan inside the PSU.

Eric

--
Remove the dross to contact me directly

 >> Stay informed about: why is there a cable from AUXFAN1 to PSU? 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]