device cannot start (code 10) on a chaintech 7njl6 motherb..

Thank you for your help.
But the problem came with sp2 of win xp.
I installed all the patchs for windows update except the sp2 and all
it's ok.
If I install the sp2, I loose my network card device, my video card and
all pci cards !!

Just another computer that can't work with sp2
 >> Stay informed about: device cannot start (code 10) on a chaintech 7njl6 motherb.. 

Thanks for sharing. I just built a new system around that board and chip
(Tigerdirect?). I will strongly reconsider the SP2 installation I was about
to undertake.

OBTW, what does your system show for clock speed? Mine shows 1.3GHz in XP.
Odd, because that 2900 should be running at over 2 GHz. I suspect that is
an XP limitation...?

v/r,

Guy


"zeppkorn" <zeppkorn RemoveThis @msn.com> wrote in message
news:1105115034.401925.216320@f14g2000cwb.googlegroups.com...
 > Thank you for your help.
 > But the problem came with sp2 of win xp.
 > I installed all the patchs for windows update except the sp2 and all
 > it's ok.
 > If I install the sp2, I loose my network card device, my video card and
 > all pci cards !!
 >
 > Just another computer that can't work with sp2
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: device cannot start (code 10) on a chaintech 7njl6 motherb.. 

Regarding the Athlon XP 2900, I found that the default setting on the 7NJL6
board is 133MHz. This is why the system showed 1.3 GHz speed. After
manually changing the setting to 200MHx, the processor runs at 1.99GHz.

Guy


"Guy" <gsaults.TakeThisOut@hotmail.com> wrote in message
news:ctj1vr0d15@enews2.newsguy.com...
 > Thanks for sharing. I just built a new system around that board and chip
 > (Tigerdirect?). I will strongly reconsider the SP2 installation I was
about
 > to undertake.
 >
 > OBTW, what does your system show for clock speed? Mine shows 1.3GHz in
XP.
 > Odd, because that 2900 should be running at over 2 GHz. I suspect that is
 > an XP limitation...?
 >
 > v/r,
 >
 > Guy
 >
 >
 > "zeppkorn" <zeppkorn.TakeThisOut@msn.com> wrote in message
 > news:1105115034.401925.216320@f14g2000cwb.googlegroups.com...
  > > Thank you for your help.
  > > But the problem came with sp2 of win xp.
  > > I installed all the patchs for windows update except the sp2 and all
  > > it's ok.
  > > If I install the sp2, I loose my network card device, my video card and
  > > all pci cards !!
  > >
  > > Just another computer that can't work with sp2
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: device cannot start (code 10) on a chaintech 7njl6 motherb..