New graphics card for SN41G2 (v2)?

Andrew MacPherson wrote:
> purplepenny DeleteThis @purplenet.co.uk (PurplePenny) wrote:
>
>> What is the most recent/fastest card that anyone has used
>> in an SN41G2(v2)
>
> The problem with these boxes (and I have one) is that the AGP slot is
> right next to the side of the case. So a good gaming card, which needs
> decent cooling, is squeezed up against the casing. That makes any fan on
> the card work much harder and make more noise unless you cut a hole in
> the case (which I haven't... yet!)
>
> I have an old 9800SE in mine, and even though it's not a fast card it
> still puts out a lot of heat, which had me worried in the recent hot
> spell in the UK. I've been looking at alternatives (overclockers.co.uk
> still has quite a few AGP cards to choose from) but finding something
> faster which runs cooler isn't easy!

Thanks for the reply Andrew. Ages ago when I was first putting the
machine together a gamer told me that he mods all his Shuttles by
cutting a hole in the case. Now I know why: he obviously wanted to run
the fasted card possible for gaming.
I've had problems with overheating of my ancient tower PC in the past
and I had to add a few extra fans; but of course that isn't an option
with the Shuttle: during that hot spell we had a huge floor fan blowing
on the machines the whole time that we were using them.
Please let me know if you find a suitable card. Do you think that
adding a cluster of small holes in the right place would be effective
for cooling or does it need to be one big hole?
Do you know which cards are not suitable because of their size: I
assume that they must have a higher/fatter profile so they stop the case
from closing.

Thanks,
Penny
 >> Stay informed about: New graphics card for SN41G2 (v2)? 

> Do you think that adding a cluster of small holes in the
> right place would be effective

I think the "sucking air through a straw" principle applies... one big
hole will always be better for airflow than lots of little ones.

As for types of card.... the ideal solution in a small case would be a
2-slot card with a cooler which vents hot air directly out of the back
of the case. But there's only got room for a single slot solution, so it
basically means no fancy cooling whatsoever. Just a basic, single slot
solution.

I have to remind myself sometimes that I bought the Shuttle purely for
basic desktop & work needs, not gaming. However the temptation's always
there to squeeze more performance into the box.

Andrew McP
 >> Stay informed about: New graphics card for SN41G2 (v2)? 

PS http://www.sudhian.com/index.php?/forums/viewforum/4/

That forum is much more active than this group, and searching there
reveals similar problems but no definite solutions.

An Nvidia 6600GT would fit in there (good, solid middle ground
performance these days), but like the older ATI 9800Pro I may buy cheap
off ebay, it's not a cool solution, and some kind of case modification
is bound to be necessary. There are also power supply constraints to
consider. Shuttle PSUs are usually very good, but the power demands of a
decent vid card adds more than just heat stress to the box.

Shuttles are nice little machines, but they're not without their problems!

Andrew McP
 >> Stay informed about: New graphics card for SN41G2 (v2)? 

Andrew MacPherson wrote:

> I have to remind myself sometimes that I bought the Shuttle purely for
> basic desktop & work needs, not gaming. However the temptation's always
> there to squeeze more performance into the box.


I assembled Kev's Shuttle for him to take to friends' LAN parties: even
bought a keyboard/mouse combo that came in a nice case for carrying.
But then he discovered that the only games they play at these parties
are ones Kev isn't interested in

Penny
 >> Stay informed about: New graphics card for SN41G2 (v2)? 

Andrew MacPherson wrote:
> PS http://www.sudhian.com/index.php?/forums/viewforum/4/
>
> That forum is much more active than this group, and searching there
> reveals similar problems but no definite solutions.


Thanks, I go take a look.


> An Nvidia 6600GT would fit in there (good, solid middle ground
> performance these days), but like the older ATI 9800Pro I may buy cheap
> off ebay,


I've noticed that Radeon 9550s and 9600s are still available from places
like Novatech, Overclockers and Ebuyer but none of them have 9800 cards.


it's not a cool solution, and some kind of case modification
> is bound to be necessary.


I think that Kev is now resigned to having a hole cut in his Shuttle!

Thanks again for all the help,
Penny
 >> Stay informed about: New graphics card for SN41G2 (v2)?