Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

help with CD drive; can't install driver

 
   Hardware Problem Solving Community! (Home) -> CDRom RSS
Next:  VSync over 60hz?  
Author Message
cdoasis




Joined: Feb 01, 2005
Posts: 18



(Msg. 1) Posted: Sat Nov 19, 2005 8:11 pm
Post subject: help with CD drive; can't install driver

If anyone could help me with this, I'd appreciate it SO much.

Here's what happened; I just got a new 300gig hard drive, and hooked it up. It was working fine, and I had all these CDRs lying around that were full of data that I planned on transferring to my new drive. I burned them on this same CD drive as well. I was transferring stuff, and installing some programs on it as well. I went to install Winamp, and my computer crashed. I have no idea what that was about, but I just figured I'll skip it and use realplayer or something. I go to turn my computer back on, and when Windows XP boots up, there's no CD drive in My Computer. It doesn't work either. I go to device manager to see what the problem is, and there it says "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)." And it has a Microsoft driver listed in there! So I'm like okaaay... I went to LG's website (the brand of the CD-RW drive) and tracked down the driver needed. It requires an MS-DOS bootdisk to be made, and the driver files to be put on that disk. So I tried that, and it doesn't work. I was supposed to put the CD-RW drive on the secondary IDE channel as the master drive, but I didn't know that at first. So I don't know if that messed something up, but after I understood all the directions on their website and tried it properly, it still doesn't work. Any ideas?

 >> Stay informed about: help with CD drive; can't install driver 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Need DOS Driver for LiteOn CD-RW Drive - Using a LiteOn CD-RW drive in a win2k system, and want to use this drive in a DOS based CD backup program. Have not been able to get the drive detected in DOS using the driver being used for win2k operation ---- so believe I must ad an appropriate DOS..

CD-Driver noticed but drive invalid - I run a win95 and in MS-DOS it will not recognize my CD-ROM Drive (nor has it eveer) i have added LOADdevice=C:\command\ibmidecd.sys /d:ibmcd001 yadda yadda yadda... in my config.sys and have added MSCDEX /D:ibmcd001 /l:H in my autoexec.bat i know that..

CD-Driver noticed but drive invalid - I run a win95 and in MS-DOS it will not recognize my CD-ROM Drive (nor has it eveer) i have added LOADdevice=C:\command\ibmidecd.sys /d:ibmcd001 yadda yadda yadda... in my config.sys and have added MSCDEX /D:ibmcd001 /l:H in my autoexec.bat i know that..

CD-Driver noticed but drive invalid - I run a win95 and in MS-DOS it will not recognize my CD-ROM Drive (nor has it eveer) i have added LOADdevice=C:\command\ibmidecd.sys /d:ibmcd001 yadda yadda yadda... in my config.sys and have added MSCDEX /D:ibmcd001 /l:H in my autoexec.bat i know that..

How to install CD-RW? - My current PC has an internal CD-Rom and I think there is an additional empty slot. I want to install a new CD-RW, should I rip out the CD-Rom and install it in it's place, or should I install it next to it, if possible. Do I still need the CD-Rom to..
   Hardware Problem Solving Community! (Home) -> CDRom All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]