Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

help with nf7 overclock barton 2500+

  
   Hardware Problem Solving Community! (Home) -> ABIT RSS
Next:  red led on VA-10 motherboard  
Author Message
elrod jenkins

External


Since: Jan 26, 2004
Posts: 9



(Msg. 1) Posted: Thu Jul 15, 2004 11:26 pm
Post subject: help with nf7 overclock barton 2500+
Archived from groups: alt>comp>periphs>mainboard>abit (more info?)
I get some occasional rebooting when playing unreal 2k4, overclocked in bios
to 3200+, I have only changed the clock speed from 2500+ to 3200+, temps are
ok, so dont think its the problem, i am running 1gb of corsair value select
ddr ram. I havent changed any voltages or anything, just raised the clock
speed in bios soft menu, do i need to raise some voltages.to make this
stable? any help appreciated very much..

 >> Stay informed about: help with nf7 overclock barton 2500+ 
Back to top
Login to vote
Andrew3

External


Since: Jun 10, 2004
Posts: 6



(Msg. 2) Posted: Fri Jul 16, 2004 1:23 am
Post subject: Re: help with nf7 overclock barton 2500+ [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
To be brief
You cant run that game, ( or your pc)
at that speed
without increasing the voltage
My Mobile 2500 is running as a 2.21 ( 1.68 vlts or 1.71 ( i aint rebooting
to check)
Runs warcraft just fine
The OCZ 4000 ram and Ati 98000 might help a tad
"elrod jenkins" <nowhere.DeleteThis@somewhere.net> wrote in message
news:YtWdnQoJFPges2rdRVn-iQ@suscom.com...
I get some occasional rebooting when playing unreal 2k4, overclocked in bios
to 3200+, I have only changed the clock speed from 2500+ to 3200+, temps are
ok, so dont think its the problem, i am running 1gb of corsair value select
ddr ram. I havent changed any voltages or anything, just raised the clock
speed in bios soft menu, do i need to raise some voltages.to make this
stable? any help appreciated very much..

 >> Stay informed about: help with nf7 overclock barton 2500+ 
Back to top
Login to vote
Mark H3

External


Since: Mar 26, 2004
Posts: 20



(Msg. 3) Posted: Fri Jul 16, 2004 1:34 am
Post subject: Re: help with nf7 overclock barton 2500+ [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
I'm running the same setup - start with the cpu voltage - I run mine at
about 1.75v - step it up incrementally, until UT becomes stable.


elrod jenkins wrote:
 > I get some occasional rebooting when playing unreal 2k4, overclocked in bios
 > to 3200+, I have only changed the clock speed from 2500+ to 3200+, temps are
 > ok, so dont think its the problem, i am running 1gb of corsair value select
 > ddr ram. I havent changed any voltages or anything, just raised the clock
 > speed in bios soft menu, do i need to raise some voltages.to make this
 > stable? any help appreciated very much..
 >
 >


--
Mark H --- Frag on !
NF7-S v2.0 Win2k-sp4
WinXp-sp2rc2<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: help with nf7 overclock barton 2500+ 
Back to top
Login to vote
PRIVATE1964

External


Since: Dec 30, 2003
Posts: 693



(Msg. 4) Posted: Fri Jul 16, 2004 5:17 am
Post subject: Re: help with nf7 overclock barton 2500+ [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Yes if it doesn't seem stable you want to slowly increase the cpu voltage until
it is.
You only want to give it as much as it needs to be stable because more voltage
also means more heat.

I assume your memory is 3200 or higher.
 >> Stay informed about: help with nf7 overclock barton 2500+ 
Back to top
Login to vote
Doug5

External


Since: Jul 27, 2004
Posts: 9



(Msg. 5) Posted: Sat Jul 17, 2004 3:59 pm
Post subject: Re: help with nf7 overclock barton 2500+ [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
Definately up the voltages a bit. Mines at 1.775v on the NF7-S v2. I had
it at 1.75v but found it unstable, although it wasn't to annoying. Even now
@ 1.775v l still get the odd reboot but l don't think that a voltage
problem. My memory is @ 2.6v for a pair of twinx 2x256mb corsair sticks and
my northbridge is @ 1.7v.

Goodluck

Doug


"elrod jenkins" <nowhere DeleteThis @somewhere.net> wrote in message
news:YtWdnQoJFPges2rdRVn-iQ@suscom.com...
 > I get some occasional rebooting when playing unreal 2k4, overclocked in
bios
 > to 3200+, I have only changed the clock speed from 2500+ to 3200+, temps
are
 > ok, so dont think its the problem, i am running 1gb of corsair value
select
 > ddr ram. I havent changed any voltages or anything, just raised the clock
 > speed in bios soft menu, do i need to raise some voltages.to make this
 > stable? any help appreciated very much..
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: help with nf7 overclock barton 2500+ 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> ABIT All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]