k6 III+450 on V-503A

yup that's what my set up uses, 600 stable at default voltage, 100 fsb
~ 112 is the highest you'll use on that board

"R.Manikowski" <ut.TakeThisOut@hotmail.com> wrote in message
news:bj895j$de3$1@atlantis.news.tpi.pl...
 > Hello,
 >
 > Can anyone tell me, is 6x100 with k6 III + 450 possible on that mobo? I've
 > heard suggestion that it even supports 133MHz. Anyone tried that?
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k6 III+450 on V-503A 

I got mine up to 600 @100FSB but it was pretty much unstable. The highest
stable settings I could manage was 550. I had no luck at all with 112 FSB.

But if you want to try the higher speeds you probably will need to abandon
any ISA cards. I also had some troubles with the video card, whether I used
both the AGP and PCI 1 slots or just either one alone. I kept having to pull
the battery and let the bios go to default. Even then, I often would run
into Windows protection errors.

But XP ran a lot better than Win 98 and didn't have near as many crashes. I
eventually just got so frustrated that I built an Athlon system.

"R.Manikowski" <ut RemoveThis @hotmail.com> wrote in message
news:bj895j$de3$1@atlantis.news.tpi.pl...
 > Hello,
 >
 > Can anyone tell me, is 6x100 with k6 III + 450 possible on that mobo? I've
 > heard suggestion that it even supports 133MHz. Anyone tried that?
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k6 III+450 on V-503A 

I have the possibility to buy K6 III + 400 ACR. Is there any difference in
overclockability betweeen 400 and 450MHz versions?

U¿ytkownik "John" <sixcatsnospam RemoveThis @adelphia.net> napisa³ w wiadomo¶ci
news:ETT5b.21745$2Y6.8049927@news2.news.adelphia.net...
 > yup that's what my set up uses, 600 stable at default voltage, 100
fsb
 > ~ 112 is the highest you'll use on that board
 >
 > "R.Manikowski" <ut RemoveThis @hotmail.com> wrote in message
 > news:bj895j$de3$1@atlantis.news.tpi.pl...
  > > Hello,
  > >
  > > Can anyone tell me, is 6x100 with k6 III + 450 possible on that mobo?
I've
  > > heard suggestion that it even supports 133MHz. Anyone tried that?
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k6 III+450 on V-503A 

Better chance of hitting 600 with the 450+ cpu IMHO.

neopolaris
"socket7!" <ut.DeleteThis@hotmail.com> wrote in message
news:bjcm1r$lgr$1@nemesis.news.tpi.pl...
 > I have the possibility to buy K6 III + 400 ACR. Is there any difference in
 > overclockability betweeen 400 and 450MHz versions?
 >
 > U¿ytkownik "John" <sixcatsnospam.DeleteThis@adelphia.net> napisa³ w wiadomo¶ci
 > news:ETT5b.21745$2Y6.8049927@news2.news.adelphia.net...
  > > yup that's what my set up uses, 600 stable at default voltage, 100
 > fsb
  > > ~ 112 is the highest you'll use on that board
  > >
  > > "R.Manikowski" <ut.DeleteThis@hotmail.com> wrote in message
  > > news:bj895j$de3$1@atlantis.news.tpi.pl...
   > > > Hello,
   > > >
   > > > Can anyone tell me, is 6x100 with k6 III + 450 possible on that mobo?
 > I've
   > > > heard suggestion that it even supports 133MHz. Anyone tried that?
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: k6 III+450 on V-503A