Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

k7s5a v3 bios update for 160gig drive?

 
   Hardware Problem Solving Community! (Home) -> Elitegroup RSS
Next:  Dos sound driver wanted  
Author Message
Paul

External


Since: Feb 23, 2006
Posts: 3



(Msg. 1) Posted: Tue Jul 18, 2006 10:04 pm
Post subject: k7s5a v3 bios update for 160gig drive?
Archived from groups: alt>comp>periphs>mainboard>elitegroup (more info?)

As header, I have googled but there are so many versions I am lost. Can
anyone point me to a suitable version to fix this problem?
TIA for any help.
Paul
--
Paul reply-to is valid

 >> Stay informed about: k7s5a v3 bios update for 160gig drive? 
Back to top
Login to vote
Eric Wolfe

External


Since: Sep 28, 2003
Posts: 59



(Msg. 2) Posted: Wed Jul 19, 2006 8:40 am
Post subject: Re: k7s5a v3 bios update for 160gig drive? [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

Something might have changed since last I researched this but only the Pro
version will see drive larger than 137GB. I think it's a HW limitation of
the IDE controller, not just the BIOS, but I can't remember for sure. The
good news is that it's easily fixed with a $10 IDE ATA133 paddle card from
NewEgg. I've used the NewEgg house brand ('Koutek' and of late, 'Best')
boards as well as Promise 133 controllers (much more expensive) without
issue. A fringe benefit is that all IDE devices can be made masters so
there aren't any bizarre jumper conflicts.

Eric

"Paul" <Fintor RemoveThis @invalid.invalid> wrote in message
news:iXHyp2BVzUvEFw3e@panton.demon.co.uk...
> As header, I have googled but there are so many versions I am lost. Can
> anyone point me to a suitable version to fix this problem?
> TIA for any help.
> Paul
> --
> Paul reply-to is valid

 >> Stay informed about: k7s5a v3 bios update for 160gig drive? 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
K7s5a No Boot after BIOS update - Just tried a BIOS update to latest (030811) because I was having occasional system failures. Inital check by aminf341.exe stated the bios was correct, then after the update began the video went blank and now the maching won't boot at all. Now what? My...

K7S5A & WSFI207p Bios won't update - Hi Everyone. Does anyone know why I can't update the bios using this utility as recommended on the ECS website? Regards. Ray.

K7S5A Update - I just got a new processor an AMD XP 2600. I tried to put it on the motherboard but when I start my computer, it doesn't find my new processor. Probably my bios cant handle the new processor. When I look at my bios it says, for the processor settings..

K7S5A and WD 800JB HD update - Update: I posted some comments a while back about the WD 800JB 80G HD not getting recognized at cold bootup with my k7s5a. I've swapped an Nforce mobo (Biostar M7NCD-PRO) into the system, and nary a burp so far. This leads me to believe the comments o...

K7S5A USB problem (driver update WinXP?) - Hello, my PC doesn't recognize my USB-devices when I connect them while Win (XP Prof.) is running. If I start the computer after I had connected the device (a Canon Powershot A100 digital camera) the system recognizes the camera and all work fine. I..
   Hardware Problem Solving Community! (Home) -> Elitegroup All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]