Welcome to HardwareForumz.com!
FAQFAQ   SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log in/Register/PasswordLog in/Register/Password

kt400 bios update gone wrong

  
   Hardware Problem Solving Community! (Home) -> Soyo RSS
Related Topics:
Bios Flash on KT400 - Hello I was given this computer running Windows 2000. When it boots up its all in German, and Cmos is German. Once in Windows fine. Anything outside windows is foreign. My usual Win98 boot into German. I did manage to run the Bios Flash from..

Failed to update BIOS - I wanted to use 48bit and tried to flash BIOS on Dragon+ awdflash /f/py and the system can't boot up now. I don't know what was wrong... I followed the from SOYO web site, and Awdflash program said it was..

Info needed for BIOS update kvxb2aaa for SY-KT333 Dragon U.. - I have searched for, but have not found, any regarding this newest BIOS update from Soyo, that was released on the SOYO BIOS page Anyone tried using it, and have any ideas as to what issues this one fixes up??!!)? I have..

kt400 - is there a prblem with the KT400 ultra and the 8500dv All In Wonder vidio card ? please thaks you

Soyo KT400 and RAM - I am looking to purchase the Soyo KT400 Dragon Ultra board. I plan on putting in an Athlon XP 2400+ CPU in there with 512 MB PC2100 (266) DDR RAM. Since the max FSB of the 2400+ CPU is 266, this would be correct? Would there be any
Next:  Soyo: floppy disk(s) fail (80) issues...  
Author Message
daytrader

External


Since: Apr 27, 2007
Posts: 1



(Msg. 1) Posted: Fri Apr 27, 2007 11:31 pm
Post subject: kt400 bios update gone wrong
Archived from groups: alt>comp>periphs>mainboard>soyo (more info?)
Put into my Soyo KT400 updated two 512mb PC3200 (had one 512mb PC2100) DDR
which shows compatibility with 266/333/400 MHz bus speeds. Computer would
not load windows so went into Bios and noticed that I could not get over 200
bus speed. Thought it was due to outdated bios so I downloaded KT4L2AA9.bin
supposedly for my motherboard from SOYO. Started up with minimum boot in dos
and ranAWD824G.exe which asked for the above .bin file and saved old bios
with ...old.bin name. Then it saved old bios and came up with error message
because I typed in the wrong letter in the name so I started over and now it
just hangs up with the message to Please Wait! I waited and waited with no
results. Restarted computer and tried again with the same result. Anyone
know why I should do to get this fixed?

 >> Stay informed about: kt400 bios update gone wrong 
Back to top
Login to vote
dave AKA vwdoc1

External


Since: Nov 30, 2006
Posts: 15



(Msg. 2) Posted: Tue May 01, 2007 12:57 am
Post subject: Re: kt400 bios update gone wrong [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
new bios chip?

"lkboop" <lkboop RemoveThis @ca.rr.com> wrote in message
news:463545b4$0$4693$4c368faf@roadrunner.com...
> daytrader wrote:
>> Put into my Soyo KT400 updated two 512mb PC3200 (had one 512mb PC2100)
>> DDR which shows compatibility with 266/333/400 MHz bus speeds. Computer
>> would not load windows so went into Bios and noticed that I could not get
>> over 200 bus speed. Thought it was due to outdated bios so I downloaded
>> KT4L2AA9.bin supposedly for my motherboard from SOYO. Started up with
>> minimum boot in dos and ranAWD824G.exe which asked for the above .bin
>> file and saved old bios with ...old.bin name. Then it saved old bios and
>> came up with error message because I typed in the wrong letter in the
>> name so I started over and now it just hangs up with the message to
>> Please Wait! I waited and waited with no results. Restarted computer and
>> tried again with the same result. Anyone know why I should do to get this
>> fixed?

 >> Stay informed about: kt400 bios update gone wrong 
Back to top
Login to vote
f.campa

External


Since: May 04, 2007
Posts: 1



(Msg. 3) Posted: Fri May 04, 2007 3:14 pm
Post subject: Re: kt400 bios update gone wrong [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
On Fri, 27 Apr 2007 23:31:45 GMT, "daytrader"
<daytraderX RemoveThis @socal.rr.com> wrote:

>Put into my Soyo KT400 updated two 512mb PC3200 (had one 512mb PC2100) DDR
>which shows compatibility with 266/333/400 MHz bus speeds. Computer would
>not load windows so went into Bios and noticed that I could not get over 200
>bus speed. Thought it was due to outdated bios so I downloaded KT4L2AA9.bin
>supposedly for my motherboard from SOYO. Started up with minimum boot in dos
>and ranAWD824G.exe which asked for the above .bin file and saved old bios
>with ...old.bin name. Then it saved old bios and came up with error message
>because I typed in the wrong letter in the name so I started over and now it
>just hangs up with the message to Please Wait! I waited and waited with no
>results. Restarted computer and tried again with the same result. Anyone
>know why I should do to get this fixed?
>

Hi,

try to go web site

http://www.recoverybios.com

they can send you a new bios chip programmed.

Bye

Frank
 >> Stay informed about: kt400 bios update gone wrong 
Back to top
Login to vote
Display posts from previous:   
   Hardware Problem Solving Community! (Home) -> Soyo All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
 You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]