What means POST code 26 in GA-X38-DS5 BIOS?

FAQ

Profile

What means POST code 26 in GA-X38-DS5 BIOS?

Hardware Problem Solving Community! (Home) -> Gigabyte

Next: Does GA-X38-DS5 really support ECC DRAMs?

Author

Message

Petr Soucek

External

Since: Feb 29, 2008
Posts: 2

(Msg. 1) Posted: Wed Mar 05, 2008 8:17 pm Post subject: What means POST code 26 in GA-X38-DS5 BIOS? Archived from groups: alt>comp>periphs>mainboard>gigabyte (more info?)

My GA-X38-DS5 ends with POST code 26 when Pentium D 950 rev. C1 is used, does anybody know what this POST code means? The only POST code table for Award BIOS 6.00PG I found is here: http://www.bioscentral.com/postcodes/awardbios.htm (bottom), but there is just 26h Reserved Any idea? Petr >> Stay informed about: What means POST code 26 in GA-X38-DS5 BIOS?

Display posts from previous:

Related Topics:

Post Code Error - Hey All, I just purchaced a non working GA-7N400 Pro 2 MB from ebay. I installed known working components after clearing the BIOS and removing the battery overnight and booted with a PCI Post Mortem card in the bottom PCI slot. It comes up with the error...

post after bios save - Hi all, I have a weird one - i've got a newly build PC based on the 8KNXP, and i'm successfully getting into the BIOS, however each time I change ANY setting, after rebooting, it will not post, and i get a series of continuous beeps ! That is, I will..

GA-K8N Pro beep code - My brand new GA-K8N Pro MB with AMD Althlon 64 bit 3200+ processor works, but outputs a beep code ONLY ON POWERUP (not reset). Its 3 short beeps, with a short pause, then one beep (like dit dit dit...dit). What the hell does this mean ? The bios shows no...

K8NF-9 + Winchester Code 3000+ - Hi Chaps, I've just built a computer for a friend using: K8NF-9 Winchester Core 3000+ 512Mb (2 x 256) Corsiar Value Select XFX 6600GT 128Mb. Unfortunately i'm totally buggered, the BIOS appeared to count the memory on the first time i powered up the....

GA-7VKMP - Error Code Translation Needed - Good Morning all. I'm currently troubleshooting a fault of a work clients PC, get an error code (through speak) of a SHort Bleep, followed by a slightly higher pitched and longer bleep, followed by a higher and longer bleep, finshing with a low pitched....

	Hardware Problem Solving Community! (Home) -> Gigabyte	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum