memory - KT4V L mobo

Got the KT4 board with some 2100 generic memory, cant set the FSB for the
(Barton) processor above 133 (266) without it becoming unstable even with
the memory set at the right speed.
Ordering some faster DDR 400 Kingston memory tommorow.
"neopolaris" <.> wrote in message news:vl73a46l61kfcb@corp.supernews.com...
 > Don't skimp on the mem-it's often not worth it.
 > "AdNoctum" <julius.DeleteThis@caesar1.fsworld.co.uk> wrote in message
 > news:Xns93E9BED4B8E5juliuscaesar1fsworld@195.92.193.157...
  > > Hi! Does anyone have the above mobo and uses generic memory modules with
  > > it? If so are they any good? Also I have seen several sites that
advertise
  > > memory with the manufacturer named as "Major Brand", I take it this is
not
  > > an actual company but as it says a major brand of memory?
  > >
  > > Thanks
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: memory - KT4V L mobo 

since thats the speed of your mem it should not be a surprise. You really
need 2700 or better to run at 333 or higher.

LSASr
"Helinut" <helinut DeleteThis @ntlworld.com> wrote in message
news:TBM4b.3647$bC1.1052@newsfep4-winn.server.ntli.net...
 > Got the KT4 board with some 2100 generic memory, cant set the FSB for the
 > (Barton) processor above 133 (266) without it becoming unstable even with
 > the memory set at the right speed.
 > Ordering some faster DDR 400 Kingston memory tommorow.
 > "neopolaris" <.> wrote in message
news:vl73a46l61kfcb@corp.supernews.com...
  > > Don't skimp on the mem-it's often not worth it.
  > > "AdNoctum" <julius DeleteThis @caesar1.fsworld.co.uk> wrote in message
  > > news:Xns93E9BED4B8E5juliuscaesar1fsworld@195.92.193.157...
   > > > Hi! Does anyone have the above mobo and uses generic memory modules
with
   > > > it? If so are they any good? Also I have seen several sites that
 > advertise
   > > > memory with the manufacturer named as "Major Brand", I take it this is
 > not
   > > > an actual company but as it says a major brand of memory?
   > > >
   > > > Thanks
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: memory - KT4V L mobo 

It shouldnt make a difference, as you can set the memory speed seperately to
the FSB in the Bios (unless I'm Missing something)
"LSASr" <larry.atwood DeleteThis @comcast.net> wrote in message
news:y9CdnU40r7B_S86iU-KYgw@giganews.com...
 > since thats the speed of your mem it should not be a surprise. You really
 > need 2700 or better to run at 333 or higher.
 >
 > LSASr
 > "Helinut" <helinut DeleteThis @ntlworld.com> wrote in message
 > news:TBM4b.3647$bC1.1052@newsfep4-winn.server.ntli.net...
  > > Got the KT4 board with some 2100 generic memory, cant set the FSB for
the
  > > (Barton) processor above 133 (266) without it becoming unstable even
with
  > > the memory set at the right speed.
  > > Ordering some faster DDR 400 Kingston memory tommorow.
  > > "neopolaris" <.> wrote in message
 > news:vl73a46l61kfcb@corp.supernews.com...
   > > > Don't skimp on the mem-it's often not worth it.
   > > > "AdNoctum" <julius DeleteThis @caesar1.fsworld.co.uk> wrote in message
   > > > news:Xns93E9BED4B8E5juliuscaesar1fsworld@195.92.193.157...
   > > > > Hi! Does anyone have the above mobo and uses generic memory modules
 > with
   > > > > it? If so are they any good? Also I have seen several sites that
  > > advertise
   > > > > memory with the manufacturer named as "Major Brand", I take it this
is
  > > not
   > > > > an actual company but as it says a major brand of memory?
   > > > >
   > > > > Thanks
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: memory - KT4V L mobo 

I have that board and am running Nanya 256,512 PC2700 ram with no issues..
 >> Stay informed about: memory - KT4V L mobo 

It might not make a difference, but he said that he was running "generic"
2100 memory which in my book usually says it will run at rated speed but
probably not much higher and even then you'll have to slow the timing down
so much that the increased speed will be off set. (i.e. 133 @cas 2 is
acutally faster than 150 @cas3) Probably not a lot of overhead on the speed
to allow it to go much higher. He could try adding voltage BUT what's the
point? He will never have any chance of running that Barton at 333 and
higher without good 2700 or 3200 memory. I much prefer Corsair, myself.

LSAsr

"Helinut" <helinut.TakeThisOut@ntlworld.com> wrote in message
news:TA%4b.4097$c12.50826@newsfep4-glfd.server.ntli.net...
 > It shouldnt make a difference, as you can set the memory speed seperately
to
 > the FSB in the Bios (unless I'm Missing something)
 > "LSASr" <larry.atwood.TakeThisOut@comcast.net> wrote in message
 > news:y9CdnU40r7B_S86iU-KYgw@giganews.com...
  > > since thats the speed of your mem it should not be a surprise. You
really
  > > need 2700 or better to run at 333 or higher.
  > >
  > > LSASr
  > > "Helinut" <helinut.TakeThisOut@ntlworld.com> wrote in message
  > > news:TBM4b.3647$bC1.1052@newsfep4-winn.server.ntli.net...
   > > > Got the KT4 board with some 2100 generic memory, cant set the FSB for
 > the
   > > > (Barton) processor above 133 (266) without it becoming unstable even
 > with
   > > > the memory set at the right speed.
   > > > Ordering some faster DDR 400 Kingston memory tommorow.
   > > > "neopolaris" <.> wrote in message
  > > news:vl73a46l61kfcb@corp.supernews.com...
   > > > > Don't skimp on the mem-it's often not worth it.
   > > > > "AdNoctum" <julius.TakeThisOut@caesar1.fsworld.co.uk> wrote in message
   > > > > news:Xns93E9BED4B8E5juliuscaesar1fsworld@195.92.193.157...
   > > > > > Hi! Does anyone have the above mobo and uses generic memory
modules
  > > with
   > > > > > it? If so are they any good? Also I have seen several sites that
   > > > advertise
   > > > > > memory with the manufacturer named as "Major Brand", I take it
this
 > is
   > > > not
   > > > > > an actual company but as it says a major brand of memory?
   > > > > >
   > > > > > Thanks
   > > > >
   > > > >
   > > >
   > > >
  > >
  > >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: memory - KT4V L mobo