Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

memory problems with RC410L/800-M (V2.0)

 
   Hardware Problem Solving Community! (Home) -> Elitegroup RSS
Next:  K75SA Rev 3 Upgrade options needed  
Author Message
Henry Nettles

External


Since: Apr 20, 2005
Posts: 8



(Msg. 1) Posted: Fri Jun 09, 2006 10:01 pm
Post subject: memory problems with RC410L/800-M (V2.0)
Archived from groups: alt>comp>periphs>mainboard>elitegroup (more info?)

I purchased this motherboard a few weeks at Frys, as part of a combo,
this motherboard and an Intel 805 D cpu for $139.99. I have been
having some problems with memory. I have tried two different sets of
2 x 512 meg DDR2 memory. Set 1 is Patriot memory, purchased from
Newegg.

PSD21G667K
1GB PC2-5300CL5
(2x512MB) Kit

Set number 2 is
CORSAIR XMS2
Xtreme performance DDR2
CM2x512-5400C4
XMS2-5400
512MB 675MHz
XMS5402v1.3

With either set, I can only use 1 memory module at a time. With set
number 1, I get errors from Memtest or Prime95 when using both
modules. With set number 2, I cannot post with both memory modules.
But each one of the 4 memory modules will run perfectly by itself.
Memtest shows no errors, and neither does Prime95.

I also have a single 1 gig stick of PC5300, which runs fine by itself.
The bios does not have any memory settings, except for a voltage
adjustment which does not seem to help. Do I need to RMA this
motherboard?

 >> Stay informed about: memory problems with RC410L/800-M (V2.0) 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
L7VTA 1.0 - Memory problems? - A strange problem has appeared on my machine this evening and it's bugging me. Setup is: L7VTA V1.0 AMD Athlon 2400 (1.99ghz) 2x256 PC2700 DDR RAM When I now power on or reset the machine, it goes into the usual start sequence of: Diplays video card....

RAM memory slot problems on ECS mainboard model 755-A2 - Hi, I own an ECS mainboard model 755-A2. It has two DIMM slots (standard bank 0, 1 and the other is bank 2, 3). Try as I might, even with matching memory sticks that came in the same package, I cannot get the board to work with two DIMMs installed. ....

problems - I place this for the second time, because i've lost it (cann't see it anymore) Hi I have my computer with a K7s5a (version 1.0) with AMD Athlon 1.2 g running for 2 years now (24/7), and since a couple of weeks I have this problem with stopping just..

K7S5A PRo USB problems - I have a new K7S5A PRO rev 5.0 with an AMD xp2200 processor and 512 megs of PC-133 sdram, fresh install of Win98se, but the USB ports won't function. Drivers installed properly according to Device Manager and the SIS and VIA controllers show up also...

K7S5A & problems with AMD XP 2400 - I'm the owner of a K7S5A (version 3.1a). I recently purchased an AMD XP proccessor at 2400 Mhz with 266 FSB. The motherboard supports SDRAM(133 Mhz) & DDRAM(266 Mhz). Until now I used a Kingston 512 MB SDRAM 133 Mhz and Direct-X showed that an AMD XP...
   Hardware Problem Solving Community! (Home) -> Elitegroup All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]