On Fri, 05 Sep 2003 10:28:22 GMT, NOSPAMmdknight.RemoveThis@pacific.net.sg (cs)
wrote::
>I cannot beleive it. I spoilt my cd-r drive.
>
>I had 2 cd writers connected - a scsi compro 4x (CW-7502)and a 48x tdk
>cyclone cd-rw and dvd combo drive.
>
>I downloaded liteon flash 1.1.2 for removing the rpc from the dvd
>drive. I ran the exe, which had no instructions. My system hung, and
>the scsci drive light went on. Obviously, somehow the liteon utility
>was accessing the scsi channel rather than the ide channel.
>
>I waited 5 minutes, and still couldn't recover, so I rebooted. And
>now, I've lost the use of the scsi writer. It's totally unrecognizable
>by windows, and cannot read cds either. The busy light never goes off.
>
>
>I got hold of a new cw-7502 firmware and tried flashing it again, but
>after I am prompted for the scsi channel, it gives me a 'drive not
>ready' error.
>
>Can I still save this drive?
Maybe.
Since you have a copy of the firmware, if you get a hold of a copy of
mktflash, you might be able to force a flash of the flash-rom. It's
how people overclock liteon cdrw drives, so it should be easy to find.
Don't know if it will work for the DVD drive, but I suppose it's worth
checking out.
----------------------------------------
Thanks,
MCheu<!-- ~MESSAGE_AFTER~ -->
FAQ
Profile
Private Messages
Log in
