Can't get monitor to work with SN41G2. Help please

Are you in the UK. If so maybe the shuttle is putting out an NTSC signal or
a 60 htz pal signal.
Try changing the bios settings to pal or driver settings using a vga
monitor. You could try a modern
telly (one that can do NTSC or PAL60).

Paul
"Jan Bruun Andersen" <OIRZQQPYOETK RemoveThis @spammotel.com> wrote in message
news:7dab6ffb.0401261251.2e7a1539@posting.google.com...
 > Peter, what is your TV mode settings in the BIOS ("TV Mode Support" on
 > page "Advanced Chipset Features")? Is it the same in your XP Advanced
 > Display Settings?<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Can't get monitor to work with SN41G2. Help please 

Hi
Thanks for replies. I'm sorry I gave the wrong impression. It is the
monitors that are unstable after the POST and XP logo, when the
desktop tries to display. The TV remains stable. (All TV settings are
for PAL)

petert
 >> Stay informed about: Can't get monitor to work with SN41G2. Help please 

Sounds like the TV connection may be causing a refresh rate of 50 or 60Hz on
the monitor.
I remember having a problem like this once because few monitors support
50hz.

You could check your refresh rate settings but that's probably not possible
without being able to see what's on screen.
Does your TV support PAL60 or NTSC. You could try with this setting.
If the monitor is OK when using PAL60 or NTSC then it's going to be a
refresh rate problem.

What nview settings are you using?

Have a go with some of the settings using <a style='text-decoration: underline;' href="http://tvtool.info/index_e.htm." target="_blank">http://tvtool.info/index_e.htm.</a>
Excellent tool for TVs and nvid cards.
There's an eval download.

BTW I put in an agp card and am glad I did.
Paul


"petert" <peter.ches-nous DeleteThis @ntlworld.com> wrote in message
news:3spc10dgk60hsguge1btiqhnsqc68l4f0o@4ax.com...
 > Hi
 > Thanks for replies. I'm sorry I gave the wrong impression. It is the
 > monitors that are unstable after the POST and XP logo, when the
 > desktop tries to display. The TV remains stable. (All TV settings are
 > for PAL)
 >
 > petert
 >
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: Can't get monitor to work with SN41G2. Help please 

i had a similar problem. i had to boot into VGA-safe mode and
download new drivers. that seemed to fix it (the new drivers probably
just changed the default refresh/resolution or something).
 >> Stay informed about: Can't get monitor to work with SN41G2. Help please