Welcome to HardwareForumz.com!
FAQFAQ      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

Trying to overclock heres my setting

 
   Hardware Problem Solving Community! (Home) -> Home Built RSS
Next:  Antec SP500 - UK to USA  
Author Message
carm

External


Since: Dec 27, 2006
Posts: 15



(Msg. 1) Posted: Tue Jan 23, 2007 5:50 am
Post subject: Trying to overclock heres my setting
Archived from groups: alt>comp>hardware>homebuilt (more info?)

Trying to overclock here is my current setting

CPU FREQ-2000.00
PCI -33.3

VOLTAGE

CPU-1.40
VDDR-2.55
+3.3V- 3.31
+5V- 5.56
+12V- 11.84
VBAT- 3.03

I have a amd athlon 64 3200
4x256 pc3200 ddr ram

What would be good settings.

 >> Stay informed about: Trying to overclock heres my setting 
Back to top
Login to vote
kony

External


Since: Jan 03, 2004
Posts: 7693



(Msg. 2) Posted: Tue Jan 23, 2007 8:22 pm
Post subject: Re: Trying to overclock heres my setting [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

On 23 Jan 2007 05:50:14 -0800, "carm" <carm1964 RemoveThis @hotmail.com>
wrote:

>Trying to overclock here is my current setting
>
>CPU FREQ-2000.00
>PCI -33.3
>
>VOLTAGE
>
>CPU-1.40
>VDDR-2.55
>+3.3V- 3.31
>+5V- 5.56
>+12V- 11.84
>VBAT- 3.03
>
>I have a amd athlon 64 3200
>4x256 pc3200 ddr ram
>
>What would be good settings.


You left out a whole lotta details about your specific
hardware so we can't tell you, and you need to isolate some
variables like the peak CPU speed yours can do, peak memory
speed, peak HTT, etc.

Since we can't be specific, a very generic answer would be
to try reducing your memory clock to FSB (HTT) ratio by one
notch, raise the HTT to 250, raise the memory voltage to
2.7-2.8, and raise CPU vcore to 1.5 IF you heatsink can keep
it cool enough.

CPU multiplier will depend on how high your specimen of CPU
can go, use memtest86+ to test memory before booting the OS,
and Prime95's torture test to check CPU.

 >> Stay informed about: Trying to overclock heres my setting 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
setting MaxMTU ? - I am using WindowsME and is connecting to internet thru a Linksys router. It is known that the router is set MTU=1470. So is it necessary for me to set the MTU of my PC to 1470 for optimum network performance? I checked my registry, surprisingly there...

Setting up RAID1 - Being a relative newbie, I wondered whether you could run just one HDD in none RAID initially, then install another at a later date to take advantage of RAID1 (mirrored), without having to reinstall the OS, Apps, and data?

bios fan setting - Why does the bios remember the CPU fan settings but not the case fans setting ie temp vs fan speed (voltage) with UGuru or bios? after say resume from standby. If i get a fan controller the speed wont increase with temperature I guess if I restart..

Setting up RAID - I have a Supermicro P4SCT mobo. It supports RAID. I also have two same size SATA drives that I want to convert to RAID0 stripped and boot from them. I will be installing XP Pro. The instructions for the mobo say I have several choices. Auto Combined....

Questions about setting up a 10,000 rpm SATA hdd - 1. When I order the following hard drive will I need to order any special cable or accessories for the installation and setup? 2. Can I use this drive as my primary for OS, applications, etc., and add a second hard drive such as a Western Digital 80gb..
   Hardware Problem Solving Community! (Home) -> Home Built All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]