overclock tips for Epox 8KHA+ ?

"QED, eh ?" <qed_eh_.DeleteThis@btinternet.com> wrote in message news:<be1d2r$kks$1@titan.btinternet.com>...
 > First, try unplugging the box at the wall - wait 5 sec.s and start again.
 > Tried the HDD on the other IDE header ?
 > What about redetecting it in the BIOS ?
 > What about jumpering to CS ?
 >
 >

Wow, I have no idea what you're talking about. How does any of that
provide tips or advice on overclocking? =/
Thanks for replying, though.
Liam<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

What are you smoking idiot?

"QED, eh ?" <qed_eh_ DeleteThis @btinternet.com> wrote in message
news:be1d2r$kks$1@titan.btinternet.com...
 > First, try unplugging the box at the wall - wait 5 sec.s and start again.
 > Tried the HDD on the other IDE header ?
 > What about redetecting it in the BIOS ?
 > What about jumpering to CS ?
 >
 >
 >
 > "LRW" <deja DeleteThis @celticbear.com> wrote in message
 > news:3a1d1813.0307030543.1292bc3c@posting.google.com...
  > > I've, as I mentioned, an Epox 8KHA+ motherboard, and was wondering if
  > > I can get some overclocking tips.
  > > Basically, how. =)
  > >
  > > The CPU is an Athalon 1600 (1.4GHz) and 1 stick of 512MB 2100 DRAM.
  > >
  > > Web searching and searching has lead me to reviews of the board saying
  > > it's very overclocking friendly, that it's able to reach 166 mhz and
  > > remain stable, but nothing seems to explain how.
  > >
  > > Looking through the BIOS I found the section on "Frequency/Voltage
  > > Control" and I can adjust the CPU Clock from 133 to 200 (maybe more,
  > > I'm not there at the moment.) But if I do anything above 140 it hangs
  > > on the memory test at POST.
  > > The CPU Ratio I leave at AUTO, because if I chnage it, it does the
  > > same thing.
  > >
  > > I've tried in the "DRAM Clock/Drive Control" area to change DRAM Clock
  > > and DRAM Timing, but if I do anything other than "by SPD" it usually
  > > hangs at memory test at POST.
  > >
  > > Obviously I don't want to play around with it too much and end up
  > > frying something...but does anyone have any guides or know any URLs to
  > > detailed steps to overclocking this board? Or at least better
  > > explanations of what all the items in these areas of the BIOS mean?
  > >
  > > THANKS!!
  > > Liam
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

LRW wrote:
 > I've, as I mentioned, an Epox 8KHA+ motherboard, and was wondering if
 > I can get some overclocking tips.
 > Basically, how. =)
 >
 > The CPU is an Athalon 1600 (1.4GHz) and 1 stick of 512MB 2100 DRAM.
 >
 > Web searching and searching has lead me to reviews of the board saying
 > it's very overclocking friendly, that it's able to reach 166 mhz and
 > remain stable, but nothing seems to explain how.
 >
 > Looking through the BIOS I found the section on "Frequency/Voltage
 > Control" and I can adjust the CPU Clock from 133 to 200 (maybe more,
 > I'm not there at the moment.) But if I do anything above 140 it hangs
 > on the memory test at POST.

....the problem is that this board has no pci-bus divider - means u screw the
fsb...u screw the pci-bus same amount as well! I am using this board too and can
only advise dont overclock as u risk worst file corruptions - the pci bus is not
meant to be oc'ed!<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

i have this board successfully stable at 160 fsb, my ram is 2x 256 crucial
ddr pc2100 with an athlon xp 2000+
to reduce risk of hdd corruption you can force the hdds to work at udma 66
or less, and also up the pci latency timer to 64, this seems to stableise
things at these speeds.

The reason you are freezing at POST, is that the ram timings are too
strict., these need to be slackened off.... there are plenty of tutorials
about to do this, but i think if you select 'normal' for the timings in the
bios, instead of turbo, fast, or fastest it should let you by. if not find a
tutorial and slacken off the the timings. you can try
<a style='text-decoration: underline;' href="http://forums.overclockers.co.uk/showthread.php?s=5033393ea50fe07aed5b43ef0d4a52cc&threadid=53160" target="_blank">http://forums.overclockers.co.uk/showthread.php?s=5033393ea50fe07aed5b...f0d4a52</a>

Hope i can help.
Crucial ram isn't the most overclockable... you cpu should be fine. my
mother board can get upto 166fsb easily with my set up but my ram does fail
me after a few minutes sitting in xp pro..

When you find your stable fsb back it down 1 or 2 mhz just to be safe.
Keep us all posted.
Alex

"Steven" <weasel628 RemoveThis @gmx.net> wrote in message
news:be1ggn$6sie$1@ID-97755.news.dfncis.de...
 > LRW wrote:
  > > I've, as I mentioned, an Epox 8KHA+ motherboard, and was wondering if
  > > I can get some overclocking tips.
  > > Basically, how. =)
  > >
  > > The CPU is an Athalon 1600 (1.4GHz) and 1 stick of 512MB 2100 DRAM.
  > >
  > > Web searching and searching has lead me to reviews of the board saying
  > > it's very overclocking friendly, that it's able to reach 166 mhz and
  > > remain stable, but nothing seems to explain how.
  > >
  > > Looking through the BIOS I found the section on "Frequency/Voltage
  > > Control" and I can adjust the CPU Clock from 133 to 200 (maybe more,
  > > I'm not there at the moment.) But if I do anything above 140 it hangs
  > > on the memory test at POST.
 >
 > ...the problem is that this board has no pci-bus divider - means u screw
the
 > fsb...u screw the pci-bus same amount as well! I am using this board too
and can
 > only advise dont overclock as u risk worst file corruptions - the pci bus
is not
 > meant to be oc'ed!
 >
 >
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

"Alex Marsden" <alexREMOVE.DeleteThis@NO_SPAMturbonutter.com> wrote in message
news:be1l5o$f0b$1@news8.svr.pol.co.uk...
 > i have this board successfully stable at 160 fsb, my ram is 2x 256 crucial
 > ddr pc2100 with an athlon xp 2000+
 > to reduce risk of hdd corruption you can force the hdds to work at udma 66


This brings up an interesting question: Is the trade off of bringing your
fsb from 133 to 160 better than what's lost by taking your HDD x-fer from
ATA100 down to 66?

Liam<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

"Alex Marsden" <alexREMOVE.TakeThisOut@NO_SPAMturbonutter.com> wrote in message
news:be1l5o$f0b$1@news8.svr.pol.co.uk...
 > i have this board successfully stable at 160 fsb, my ram is 2x 256 crucial
 > ddr pc2100 with an athlon xp 2000+

Thanks againd for the reply--one more question:
Do you have any recommendations or tips on the CPU multiplier?
If I set it to anything except AUTO it hangs. Although, in POST it gets to
the point where it shows me my CPU and FSB and RAM stats, whether I have the
multiplier at 6 or 11, nothing seems to change in the numbers.

Thanks for the info!
Liam<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

yes, the processor you have is multiplier locked.... the 8kha+ does not
support multiplier unlocking by default.. (not sure bout ne modz) - but if
you short the cache or woteva u have to do (alter the cpu + vod the
warrenty) it will support the multiplier.
If you need this option to work buy a multiplier unlocked CPU or change ure
mobo.

As for the UDMA option, i stil have mine set at auto, which selects udma100
, and i have no corruption at 160fsb. I have a 40gb IBM deskstar. with a
pioneer dvdrom drive.
its a matter of preference. It will depend on your own individual system.
Each will be different. your hdd may be more prone to write bad sectors or
write faulty data etc.. at higher bus speeds. - your ram/cpu(unlikely in
your case) may get too hot and blow...? - who knows -
your best bet is to try all the different settings and benchamark each
time. - try 'pc mark' and '3d mark' - each tests different aspects of the
overclocking stablityness of your system.
Pc mark - hdd, cpu and ram
3d mark - fsb + grfx card

Keep us posted,
Alex

"LRW" <druid.DeleteThis@NOSPAHMcelticbear.com> wrote in message
news:PQ_Ma.96473$R73.11464@sccrnsc04...
 >
 > "Alex Marsden" <alexREMOVE.DeleteThis@NO_SPAMturbonutter.com> wrote in message
 > news:be1l5o$f0b$1@news8.svr.pol.co.uk...
  > > i have this board successfully stable at 160 fsb, my ram is 2x 256
crucial
  > > ddr pc2100 with an athlon xp 2000+
 >
 > Thanks againd for the reply--one more question:
 > Do you have any recommendations or tips on the CPU multiplier?
 > If I set it to anything except AUTO it hangs. Although, in POST it gets to
 > the point where it shows me my CPU and FSB and RAM stats, whether I have
the
 > multiplier at 6 or 11, nothing seems to change in the numbers.
 >
 > Thanks for the info!
 > Liam
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

You can control the multi of the CPU if you unlock it of course,running at
166MHz FSB is possible although you should run at UDMA 66 and increase PCI
latency to 64.
"LRW" <deja RemoveThis @celticbear.com> wrote in message
news:3a1d1813.0307030543.1292bc3c@posting.google.com...
 > I've, as I mentioned, an Epox 8KHA+ motherboard, and was wondering if
 > I can get some overclocking tips.
 > Basically, how. =)
 >
 > The CPU is an Athalon 1600 (1.4GHz) and 1 stick of 512MB 2100 DRAM.
 >
 > Web searching and searching has lead me to reviews of the board saying
 > it's very overclocking friendly, that it's able to reach 166 mhz and
 > remain stable, but nothing seems to explain how.
 >
 > Looking through the BIOS I found the section on "Frequency/Voltage
 > Control" and I can adjust the CPU Clock from 133 to 200 (maybe more,
 > I'm not there at the moment.) But if I do anything above 140 it hangs
 > on the memory test at POST.
 > The CPU Ratio I leave at AUTO, because if I chnage it, it does the
 > same thing.
 >
 > I've tried in the "DRAM Clock/Drive Control" area to change DRAM Clock
 > and DRAM Timing, but if I do anything other than "by SPD" it usually
 > hangs at memory test at POST.
 >
 > Obviously I don't want to play around with it too much and end up
 > frying something...but does anyone have any guides or know any URLs to
 > detailed steps to overclocking this board? Or at least better
 > explanations of what all the items in these areas of the BIOS mean?
 >
 > THANKS!!
 > Liam<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

"Alex Marsden" <alexREMOVE.TakeThisOut@NO_SPAMturbonutter.com> wrote in message
news:be238h$qu0$1@news8.svr.pol.co.uk...
 > yes, the processor you have is multiplier locked.... the 8kha+ does not
 > support multiplier unlocking by default.. (not sure bout ne modz) - but if
 > you short the cache or woteva u have to do (alter the cpu + vod the
 > warrenty) it will support the multiplier.
 > If you need this option to work buy a multiplier unlocked CPU or change
ure
 > mobo.
 >
Oh good Lord....<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

not to be sarcy of nuttin, but surely i posted this earlier in the thread??
check what other people have written before re-writing something.
Alex

"Nitza666" <nitza666.DeleteThis@hot.ty> wrote in message
news:1057271449.236911@athprx02...
 > You can control the multi of the CPU if you unlock it of course,running at
 > 166MHz FSB is possible although you should run at UDMA 66 and increase PCI
 > latency to 64.
 > "LRW" <deja.DeleteThis@celticbear.com> wrote in message
 > news:3a1d1813.0307030543.1292bc3c@posting.google.com...
  > > I've, as I mentioned, an Epox 8KHA+ motherboard, and was wondering if
  > > I can get some overclocking tips.
  > > Basically, how. =)
  > >
  > > The CPU is an Athalon 1600 (1.4GHz) and 1 stick of 512MB 2100 DRAM.
  > >
  > > Web searching and searching has lead me to reviews of the board saying
  > > it's very overclocking friendly, that it's able to reach 166 mhz and
  > > remain stable, but nothing seems to explain how.
  > >
  > > Looking through the BIOS I found the section on "Frequency/Voltage
  > > Control" and I can adjust the CPU Clock from 133 to 200 (maybe more,
  > > I'm not there at the moment.) But if I do anything above 140 it hangs
  > > on the memory test at POST.
  > > The CPU Ratio I leave at AUTO, because if I chnage it, it does the
  > > same thing.
  > >
  > > I've tried in the "DRAM Clock/Drive Control" area to change DRAM Clock
  > > and DRAM Timing, but if I do anything other than "by SPD" it usually
  > > hangs at memory test at POST.
  > >
  > > Obviously I don't want to play around with it too much and end up
  > > frying something...but does anyone have any guides or know any URLs to
  > > detailed steps to overclocking this board? Or at least better
  > > explanations of what all the items in these areas of the BIOS mean?
  > >
  > > THANKS!!
  > > Liam
 >
 ><!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ? 

Yeah,I have an 8kha+ and an XP 1800+(watercooled) and PC3700 DDR. Mine gets
lockups at 150+ FSB. It's slightly better at UDMA66. Haven't tried the PCI
latency you.Will do so today.

  >> 166MHz FSB is possible although you should run at UDMA 66 and increase PCI
  >> latency to 64.<!-- ~MESSAGE_AFTER~ -->
 >> Stay informed about: overclock tips for Epox 8KHA+ ?