I would start by upping the multiplier and keep going util you find the
max clock speed the processor core will go then you know the max speed
you can do. Now i would start upping the fsb until you get as close as
possible to the processors max core capability which you wrote down. Of
course you would test stability for each of these adjustments
On Thu, 17 Jul 2003 14:31:53 +0000 (UTC), pjgtech.DeleteThis@cix.compulink.co.uk
had the will to write:
>I've just bought and built a new pc consisting of:
>
>Asus A7N6X Deluxe m/b
>AMD Athlon 2500 Barton cpu with AMD fan and heatsink
>Antec case and 340w psu
>512Mb Crucial pc2700 DDR ram (2 x 256Mb)
>Maxtor Diamond max 120Gb SATA h/d
>ATI Radeon 9600 Pro AGP card 128mb
>Windoze XP os
>
>I'd like to know how far I can probably overclock/overbus this system?
>
>I also have 3 extra fans in the case (one top rear, one bottom front, and
>one in side panel opposite AGP card) to keep cooling under control, so
>ventilation shouldn't be a problem.
>
>My system is currently running at the default 2500, but what changes to
>the bios settings do you recommend.
>
>Eg: what clock frequency should I set?
>what memory settings?
>what core voltage?
>what AGP aperture size?
>
>Etc, etc...
>
>I have already d/l'd and installed the utilities (Radlinker) to overclock
>the ATI card, and its running nicely.
>
>I've installed Win XP and Directx9 and thats running smoothly too.
>
>BTW, I've built and overclocked my last two systems, so I'm not
>inexperienced or afraid to push the system a bit..
>
>Any advice would be appreciated, thanx...
>
>*Peter*
----
Lee<!-- ~MESSAGE_AFTER~ -->
FAQ
Profile
Private Messages
Log in
