Welcome to HardwareForumz.com!
FAQFAQ    SearchSearch      ProfileProfile    Private MessagesPrivate Messages   Log inLog in

random boot failure with new board and CPU

 
   Hardware Problem Solving Community! (Home) -> Gigabyte RSS
Next:  T'Bird Athlon with Gigabyte Motherboard ?  
Author Message
no spam2

External


Since: Oct 13, 2004
Posts: 58



(Msg. 1) Posted: Sat Aug 30, 2003 3:57 pm
Post subject: random boot failure with new board and CPU
Archived from groups: alt>comp>periphs>mainboard>gigabyte (more info?)

Hello,

I am experiencing an intermittent problem of my PC failing to boot. Other
than the boot CDROM light blinks for a few seconds, the problem occurs with
only the fans going. There is no initial post, just a black screen. The
monitors power light shows no activity.

This does not occur at every boot but when it does, if I hit the reset
button a few times it eventually kicks the system into life and it boots up
without any further problems.

To rectify the problem, I have re-flashed the machine with its release bios
(ver F1). I have also tried fixing the master boot record by booting to
the WinXP installation CDRom, and then using the 'R' command to get into the
recovery consol, ran the 'fixmbr' command. However the problem still
persists. Anyone got any ideas???

I have the following setup:

Athlon XP 2600+ CPU
Gigabyte GA-7VT600 1394 motherboard
1 X stick of Kingmax 512Mb PC3200 Ram
Leadtek WinFast A180 Cinema (GF4 MX440 X8 with TV)
Hercules Fortissimmo 7.1 sound card.
and two hard drives - an 80gig WD JB 7200 IDE drive (the boot drive) and a
Seagate 80gig 7200.7 SATA drive.

I have been able to install Windows XP Home successfully with everything
recognised by the system. I have also installed the latest drivers.


Thanks,
Shane

 >> Stay informed about: random boot failure with new board and CPU 
Back to top
Login to vote
Lee Blaver

External


Since: Jan 18, 2004
Posts: 1



(Msg. 2) Posted: Sun Aug 31, 2003 1:53 am
Post subject: Re: random boot failure with new board and CPU [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)

no spam wrote:
 > Hello,
 >
 > I am experiencing an intermittent problem of my PC failing to boot. Other
 > than the boot CDROM light blinks for a few seconds, the problem occurs with
 > only the fans going. There is no initial post, just a black screen. The
 > monitors power light shows no activity.
 >
 > This does not occur at every boot but when it does, if I hit the reset
 > button a few times it eventually kicks the system into life and it boots up
 > without any further problems.
 >

What is the wattage of the PSU and is it of a reasonable quality?
Try a different one anyway, if you have one available.

Lee

 >> Stay informed about: random boot failure with new board and CPU 
Back to top
Login to vote
Display posts from previous:   
Related Topics:
Ga-7vaxp failure to boot - Hey board worked fine for a while but never woke up from Stand-By so I disabled that option and only Hibernated. Now my system will not boot from hibernation; I would repeatedly hit the power button and the reboot but no go.I've checked the off/on switch...

GA-8IG1000 Pro Intermittent Boot failure - I bought this computer recently: GA-8IG1000 Pro P4-2.6 512mb Twinx-3200 (400MHz) DDR RAM COrsair ATI Rdn 9200, 64Mb 128 bit Barracude 7200.7, 80Gb 7200Rpm 8.5 Ms SATA WIndows 2000 sp4 I get an intermittent error during cold Boot: After "Verifying D...

8KNXP (Rev1) with RAID 0 & 1: DISK BOOT FAILURE - Hi, I have been running the following system for a year & yesterday when the system restarted it said "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". The PC comprises: -------------------- Giga 8KNXP (Rev1) with 2.8GHz Iintel c...

GAK8NF-9 nForce4 board won't boot - I just bought this board and it seemed to have good reviews. Even though on NewEgg it didn't list it supporting the AMD 64X2 I went the the Gigabyte website and it was listed as supporting it. I'm using an ample enough PSU with the extra 12V 4pin power...

GA-8KNXP Board skipping card BIOSes at boot - Hi all, Anyone have any ideas why my board would all of a sudden start skipping the startup bios screens for two of my cards? I'm running an Adaptec 19160 card and an HP NetRaid card on a Gigabyte board (GA-8KNXP) and the card info has stopped coming up...
   Hardware Problem Solving Community! (Home) -> Gigabyte All times are: Pacific Time (US & Canada)
Page 1 of 1

 
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



[ Contact us | Terms of Service/Privacy Policy ]