 |
|
|
|
Next: Looking for smallest possible power supply for 2 ..
|
| Author |
Message |
External
Since: Feb 28, 2004
Posts: 8
|
(Msg. 1) Posted: Wed Mar 31, 2004 3:15 pm
Post subject: removing hard drives under XP
Archived from groups: comp>sys>ibm>pc>hardware>storage (more info?)
|
|
|
I wonder if anyone can help please.
I have an XP based system which currently has two physical drives.
The first drive (C) is an old ATA66 drive with the operating system on it.
The second drive is an ATA133 drive, partitioned into D and E.
I wanted to get rid of the old slow drive, so I used Drive Copy to copy it
onto drive D, making drive D bootable.
I then removed the old drive, reconfigured the new one to be master and
re-booted.
The computer started to boot but halted after a while and refused to go any
further. It wouldn't boot in safe mode either.
I suspect that it may be to do with the fact that the OS is expecting to
find C, D, and E when it starts.
How can I remove the old drive in a way that XP finds acceptable?
TIA
cw |
|
| Back to top |
|
 | |
External
Since: Nov 09, 2003
Posts: 2385
|
(Msg. 2) Posted: Thu Apr 01, 2004 5:30 am
Post subject: Re: removing hard drives under XP [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
cw <cw.bus DeleteThis @ntlworld.com> wrote in message
news:6Lxac.268$Tq5.136@newsfe3-win.server.ntli.net...
> I wonder if anyone can help please.
> I have an XP based system which currently has two physical drives.
> The first drive (C) is an old ATA66 drive with the operating system on it.
> The second drive is an ATA133 drive, partitioned into D and E.
> I wanted to get rid of the old slow drive, so I used Drive
> Copy to copy it onto drive D, making drive D bootable.
> I then removed the old drive, reconfigured
> the new one to be master and re-booted.
> The computer started to boot but halted after a while and
> refused to go any further. It wouldn't boot in safe mode either.
> I suspect that it may be to do with the fact that the
> OS is expecting to find C, D, and E when it starts.
Its more complicated than that. If the only thing on the original D and
E was just data, it should have worked fine if you cloned properly.
> How can I remove the old drive in a way that XP finds acceptable?
Its crucial when cloning an XP boot drive that XP cant see both
the original, in this case the ATA66 drive, and the clone of XP on
the ATA133 drive on the first boot after the clone has been done.
You need to do the clone and then turn the system off and physically
unplug the ATA66 drive and boot off the ATA133 drive. XP will claim
to have found new hardware and request a reboot. You should allow
that reboot and it should boot fine. THEN you can connect the ATA66
drive again if you want to format it and use it for data storage etc.
And its safest to do the clone using the dos floppys or after having
booted the Drive Copy CD so you get to turn the system off and
unplug the ATA66 before you boot XP after the clone has been done.<!-- ~MESSAGE_AFTER~ --> |
|
| Back to top |
|
| |
External
Since: Feb 28, 2004
Posts: 8
|
(Msg. 3) Posted: Thu Apr 01, 2004 5:30 am
Post subject: Re: removing hard drives under XP [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"Rod Speed" <rod_speed.DeleteThis@yahoo.com> wrote in message
news:c4ern2$2hcqtb$1@ID-69072.news.uni-berlin.de...
>
> cw <cw.bus.DeleteThis@ntlworld.com> wrote in message
> news:6Lxac.268$Tq5.136@newsfe3-win.server.ntli.net...
>
> > I wonder if anyone can help please.
>
> > I have an XP based system which currently has two physical drives.
>
> > The first drive (C) is an old ATA66 drive with the operating system on
it.
> > The second drive is an ATA133 drive, partitioned into D and E.
>
> > I wanted to get rid of the old slow drive, so I used Drive
> > Copy to copy it onto drive D, making drive D bootable.
>
> > I then removed the old drive, reconfigured
> > the new one to be master and re-booted.
>
> > The computer started to boot but halted after a while and
> > refused to go any further. It wouldn't boot in safe mode either.
>
> > I suspect that it may be to do with the fact that the
> > OS is expecting to find C, D, and E when it starts.
>
> Its more complicated than that. If the only thing on the original D and
> E was just data, it should have worked fine if you cloned properly.
>
> > How can I remove the old drive in a way that XP finds acceptable?
>
> Its crucial when cloning an XP boot drive that XP cant see both
> the original, in this case the ATA66 drive, and the clone of XP on
> the ATA133 drive on the first boot after the clone has been done.
>
> You need to do the clone and then turn the system off and physically
> unplug the ATA66 drive and boot off the ATA133 drive. XP will claim
> to have found new hardware and request a reboot. You should allow
> that reboot and it should boot fine. THEN you can connect the ATA66
> drive again if you want to format it and use it for data storage etc.
I did disconnect the old drive, and I did the copy using Drive Copy DOS
diskettes, so XP would only have seen the new boot partition.
CW<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: removing hard drives under XP |
|
| Back to top |
|
| |
External
Since: Nov 09, 2003
Posts: 2385
|
(Msg. 4) Posted: Thu Apr 01, 2004 11:49 am
Post subject: Re: removing hard drives under XP [Login to view extended thread Info.]
Archived from groups: per prev. post (more info?)
|
|
|
"cw" <cw.bus.TakeThisOut@ntlworld.com> wrote in message news:K1Gac.250$CX4.163@newsfe1-win...
>
> "Rod Speed" <rod_speed.TakeThisOut@yahoo.com> wrote in message
> news:c4ern2$2hcqtb$1@ID-69072.news.uni-berlin.de...
> >
> > cw <cw.bus.TakeThisOut@ntlworld.com> wrote in message
> > news:6Lxac.268$Tq5.136@newsfe3-win.server.ntli.net...
> >
> > > I wonder if anyone can help please.
> >
> > > I have an XP based system which currently has two physical drives.
> >
> > > The first drive (C) is an old ATA66 drive with the operating system on
> it.
> > > The second drive is an ATA133 drive, partitioned into D and E.
> >
> > > I wanted to get rid of the old slow drive, so I used Drive
> > > Copy to copy it onto drive D, making drive D bootable.
> >
> > > I then removed the old drive, reconfigured
> > > the new one to be master and re-booted.
> >
> > > The computer started to boot but halted after a while and
> > > refused to go any further. It wouldn't boot in safe mode either.
> >
> > > I suspect that it may be to do with the fact that the
> > > OS is expecting to find C, D, and E when it starts.
> >
> > Its more complicated than that. If the only thing on the original D and
> > E was just data, it should have worked fine if you cloned properly.
> >
> > > How can I remove the old drive in a way that XP finds acceptable?
> >
> > Its crucial when cloning an XP boot drive that XP cant see both
> > the original, in this case the ATA66 drive, and the clone of XP on
> > the ATA133 drive on the first boot after the clone has been done.
> >
> > You need to do the clone and then turn the system off and physically
> > unplug the ATA66 drive and boot off the ATA133 drive. XP will claim
> > to have found new hardware and request a reboot. You should allow
> > that reboot and it should boot fine. THEN you can connect the ATA66
> > drive again if you want to format it and use it for data storage etc.
> I did disconnect the old drive, and I did the copy using Drive Copy
> DOS diskettes, so XP would only have seen the new boot partition.
So what version of Drive Copy and how is
the old drive formatted, FAT32 or NTFS ?
Ghost 2003 will certainly work and is dirt cheap
as part of SystemWorks Pro 2003 from ebay etc.<!-- ~MESSAGE_AFTER~ --> >> Stay informed about: removing hard drives under XP |
|
| Back to top |
|
| |
|
You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
|
|
|
|
FAQ
Profile
Private Messages
Log in
