resource conflict

FAQ

Profile

resource conflict

Hardware Problem Solving Community! (Home) -> ABIT

Next: Can someone "please" help me with recor..

Author

Message

riddler317

External

Since: Jun 30, 2007
Posts: 1

(Msg. 1) Posted: Sat Jun 30, 2007 1:56 am Post subject: resource conflict Archived from groups: alt>comp>periphs>mainboard>abit (more info?)

ok im having a problem with my acer 5100 laptop.. my windows will not load everytime i get to the windows load screen it just freeze the bar under the word windows does not move at all...also when i turn on the notebook it says resource conflict- pci in slot 03 what can i do to fix this???? >> Stay informed about: resource conflict

Display posts from previous:

Related Topics:

Disk conflict - I got a SATA disk for my ic7 and installed Windows which worked fine but then I connected an old hard disk (not SATA) and it won't boot because drive letters have changed. I looked in the BIOS and the SATA disk is in channel 3 instead of channel 1 which....

Running Dual Boot with 98SE and XP Pro SP1 - I have a dual boot system on an Abit BD7II-R with 98SE on an old Seagate ATA33 HDD on Primary IDE 1 Master and a Lite-On CD-RW Primary Slave. Secondary IDE 2 Master is a LG GSA-4040B DVD-RAM with NO slave. My WinXP Pro is on Primary IDE 3 & 4 as a RA...

NF7-S SATA RAID-0, WD-SE: Anyone wanna compare disk benchm.. - Greetings Abit and Storage Newsgroup, I have just had a bit of spare time to finally do some proper tests on my SATA RAID-0 set-up. I was hoping that some of you out there would be able to run some tests yourself so we can compare results. Doesn't..

Upgraded to AMD XP processor, now windows slower! - Hi, I have an Abit Kt7a mobo and just upgraded my 1.33 GHz processor to a 1800XP (happily running at 2GHz). The strang thing is that in Windows (2000 Pro) when I ran the UT2k3 benchmark the FPS dropped by 5, instead of going up because I now have a faste...

Abit AI7 - Yet another NB failure, but a different question - Yes, the stock NB fan on my AI7 is showing signs that it will soon fail. I'm in the U.S., so I don't want to go the route of either RMA'ing my board or buying the same unreliable fan from Abit. I know most would recommend replacing the fan with the Zalma...

	Hardware Problem Solving Community! (Home) -> ABIT	All times are: Pacific Time (US & Canada) (change)
Page 1 of 1

You can post new topics in this forum
You can reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum