I don't know. The drive didn't come with a jumper (nothing on
the metal pins). The old WD 500GB drive never needed to be
jumped, so I figure this one may not need a jumper either.
This is the drive. It doesn't have a manual either.
http://www.wdc.com/en/products/products.asp?driveid=311&language=en
On Mon, 3 Dec 2007 07:03:52 -0000, "Acedrew" <abc.DeleteThis@nospam.thanks>
wrote:
>Does the new 750GB need jumpering to to SATA1?
>
>"Someone" <someone.DeleteThis@home.com> wrote in message
>news:02aed84d$0$16846$c3e8da3@news.astraweb.com...
>> I've had this P4P800 MB from 4 years ago. It supports two SATA
>> drives. I've been using one Western Digital 500GB SATA drive
>> since last summer and it was good.
>>
>> I just bought a new WD 750GB SATA drive. It works fine when it's
>> plugged in just by itself. But when I plug in both SATA drives.
>> The file copy from any drive to either SATA drive, between the
>> two SATA drives, becomes very slow. Any idea? TIA.
>> >> Stay informed about: sata drive problem with Asus P4P800 Deluxe motherboard