smart media 3.3V question ?

I have decided to bring my old Fuji MX-1200 back to life as a second camera.
Problem is i went and bought a 64mb Smart Media card for it and the camera
says "No Card" !. The 8mb and 2mb cards work ok. The only difference that i
can see between the cards is that the 2 and 8 Mb ones have "3.3 Volts"
stamped on them, whereas the 64Mb one doesn't !.

Is there any way i can get the 64Mb card to work in the camera ??. Is it
likely to be the case that it's not working because of this 3.3V not being
stamped on it ????

Cheers
Andrew

I have now just found out that the camera only accepts 2mb to 32mb cards !!.
Is there a way that i can format my 64mb card to 32mb and get it to work
???? hmmmmm !

Regards
Andrew




"Andy100" <andy100 DeleteThis @aog.com> wrote in message
news:dnsc0a$mgp$1@news6.svr.pol.co.uk...
> I have decided to bring my old Fuji MX-1200 back to life as a second
camera.
> Problem is i went and bought a 64mb Smart Media card for it and the camera
> says "No Card" !. The 8mb and 2mb cards work ok. The only difference that
i
> can see between the cards is that the 2 and 8 Mb ones have "3.3 Volts"
> stamped on them, whereas the 64Mb one doesn't !.
>
> Is there any way i can get the 64Mb card to work in the camera ??. Is it
> likely to be the case that it's not working because of this 3.3V not being
> stamped on it ????
>
> Cheers
> Andrew
>
>