O/C tips?

New to this o/c'ing life style, built my first rig couple of weeks ago, and
took my first steps at oveclocking

mainy used ati tool for the gfx and "easytuner" for the cpu

Anyone know of any good upto date o/c'ing beginners guides.

Plus what do think of my attempts below

Thanks


--
"Blu-Ray"
2600+Sempron (O/C @2.046Ghz)
512Mb DDR 400
9600 pro 128 (O/C @ 425/540)
Gigabyte 7VT600P-RZ mobo with 400mhz fsb
Raidmax cobra case with 420w psu

Veritech wrote:
 > New to this o/c'ing life style, built my first rig couple of weeks
 > ago, and took my first steps at oveclocking
 >
 > mainy used ati tool for the gfx and "easytuner" for the cpu
 >
 > Anyone know of any good upto date o/c'ing beginners guides.
 >
 > Plus what do think of my attempts below

Good to see you here

About the graphics card no comments, AtiTool is the most commonly used
program to find the limits of an OC.

I would recommend against using 'Easytuner' for overclocking the CPU. It's
more common to do this, using the BIOS.
How it's done, is also described in this link:
<a style='text-decoration: underline;' href="http://www.pcstats.com/articleview.cfm?articleid=1597&page=3" target="_blank">http://www.pcstats.com/articleview.cfm?articleid=1597&page=3</a>

You're a bit out of luck, this isn't a real overclocking board Gigabyte
didnt lock the AGP/FSB ratio, which means you cant raise the CPU speed
without also overclocking the AGP bus. It depends on your videocard how long
this is succesfull. These reviewers of your board got it to a 210 MHz FSB,
only 5%


--
Thomas<!-- ~MESSAGE_AFTER~ -->